Sorry I just had to do this. - Printable Version +- (https://bigbluetrains.com) +-- Forum: The Depot (https://bigbluetrains.com/forumdisplay.php?fid=3) +--- Forum: Upper Berth (https://bigbluetrains.com/forumdisplay.php?fid=7) +--- Thread: Sorry I just had to do this. (/showthread.php?tid=6221) |
Re: Sorry I just had to do this. - yellowlynn - 07-28-2013 Quote:Wait a minute, what's a conductor gunna do with a ladder? Sheesh You got that wrong. Whats the fireman, and I Don't Know is the conductor. And to keep things straight, Hes the engineer. (I think) Lynn Re: Sorry I just had to do this. - yellowlynn - 07-28-2013 Besides, how do you get those quotes in those white rectangles? Lynn Re: Sorry I just had to do this. - ezdays - 07-28-2013 yellowlynn Wrote:Besides, how do you get those quotes in those white rectangles? Ya gotta hit the "quote" button in the upper right of a post, or use the "quote" button in the composing window, but then you will have to copy/paste to get the quote inside those [quote] brackets. Your best bet is to use the first way. Re: Sorry I just had to do this. - teejay - 07-28-2013 My only question on this ...why would anyone a name a forum ZEALOT ..........why not aardvark , or maybe besmirch ....maybe commando T Re: Sorry I just had to do this. - Lester Perry - 07-28-2013 I thought this was about the light at the end of the tunnel Re: Sorry I just had to do this. - yellowlynn - 07-28-2013 Don, when you hit that quote in the upper right corner, is that why some messages contain the complete message they are quoting from? No way to quote just part? Thanx Lynn Re: Sorry I just had to do this. - ezdays - 07-28-2013 yellowlynn Wrote:Don, when you hit that quote in the upper right corner, is that why some messages contain the complete message they are quoting from? No way to quote just part? Yeah, we do it all the time. Just quote the whole thing, then delete what you don't want. Re: Sorry I just had to do this. - Steamtrains - 07-28-2013 ezdays Wrote:yellowlynn Wrote:Don, when you hit that quote in the upper right corner, is that why some messages contain the complete message they are quoting from? No way to quote just part? So why's you all worried about quotes...?? We still gotta figure out the ladder/light conundrum... I say use the top half....It's closer to the light.... Re: Sorry I just had to do this. - Lester Perry - 07-28-2013 Don't you need the bottom half to reach the top half? Re: Sorry I just had to do this. - ezdays - 07-29-2013 Lester Perry Wrote:Don't you need the bottom half to reach the top half? Like I said, anyone that uses just the top half of a ladder will do it without any support. Re: Sorry I just had to do this. - Lester Perry - 07-29-2013 Wait a minute, who said we need a latter. It might be a lantern on the ground. Oops this one is loaded Re: Sorry I just had to do this. - yellowlynn - 07-29-2013 Nobody has ever said how high that light is. If you ar 5'8" tall, your shoulders should be at least 4'10" high. Stand on your shoulders and you should be able to reach another 6' or more. That makes 11' or more. Then comes the question, is it on the wall, where you can brace yourself? Or in the middle where you staggr around and trip over the tracks? You folks just aren't looking at this syantifficully. Another question, If the light is on, the bulb is hot and you can't touch it to unscrew it. I say"leave it alone and it will burn oud sooner or later on its own." If you want it lit, fix it and leave us alone!! Lynn Re: Sorry I just had to do this. - MountainMan - 07-29-2013 I used the low tech solution. I used a rock and put out the light. Or to paraphrase Lester's style, I threw myself into finding a solution. Re: Sorry I just had to do this. - Charlie B - 07-29-2013 MM, that is the best one yet...ROFLMAO Charlie Re: Sorry I just had to do this. - ezdays - 07-29-2013 What you guys are forgetting is that we want the light to by on . They can turn theirs off, but ours, well, we need it to keep it on to stay the course. You can see what happens when they fool around with one. :cry: |