PID Settings of Econami Sound Decoders - Printable Version +- (https://bigbluetrains.com) +-- Forum: The Back Shop (https://bigbluetrains.com/forumdisplay.php?fid=52) +--- Forum: DCC (https://bigbluetrains.com/forumdisplay.php?fid=38) +--- Thread: PID Settings of Econami Sound Decoders (/showthread.php?tid=8138) |
PID Settings of Econami Sound Decoders - Schraddel - 08-27-2016 Hello! Here i will only list my settings for the motor control CVs: NEW Atlas ALCO RSD-4 (the motor looks alike as one of these Mabuchi 180 Type, no cogging was perceptible when turning the motor by hand) : CV10: BEMF cutout 0 CV 67: 1 CV 68: 3 Then a straight line to CV94: 92 CV209: KP Coefficient 80 CV210: KI Coefficient 20 CV211: Low-Speed Compensation 20 CV212: BEMF Feedback Intensity 255 (100%) CV213: BEMF Sample Period 9 CV214: BEMF Sample Aperture Time 15 CV215: BEMF Referece Voltage 150 CV216: Motor Speed Step Deadband 2 CV217: Motor Control Register 10 CV218: Analog Mode Motor Start Voltage Please note, there are some differencies compared with the hitherto PID adjustings of Tsunamis before. For further reading: <!-- m --><a class="postlink" href="http://www.soundtraxx.com/manuals/Econami_Diesel_Users_Guide.pdf">http://www.soundtraxx.com/manuals/Econa ... _Guide.pdf</a><!-- m --> With these settings i got my Atlas RSD-4 to a mere crawling, setting in move without any jerks. Greetings Lutz |