Making styrene look like wood
#1
The following tutorial was submitted by "Drew1125" on 5-3-03, and is being recreated here to bring back some historical records to the New Academy:
#2
I've been working on some structures for the layout, & needed something to represent wooden doors...
I use this same technique to make loading platforms, porches, & walls...anything that needs to look like planking.
This piece will be cut into 2 N scale doors, so my apologies for it being a bit small...I must also apologize for a couple of the photos being a bit blurred
The 1st photo shows the piece of plain white styrene I started with...

   

First I take a razor saw, & saw parrallel grooves in the piece, roughly 6-12 scale inches apart..

   


Next, I drag the teeth of the saw blade sideways to form a "grain" in the "planks"

   

Next, I take the point of a hobby knife, & just randomly scribe some of the grooves a little deeper...

   

Now I paint with flat black spray paint...

   

After the spray paint drues, I dry-brush with Polly Scale Dirt, Mud, Earth, & Aged White, then I give it a wash of India Ink & alcohol...

And the result (hopefully) looks like some weathered planking...

   

__________________
-Drew-
NARA Member #48
Life is all the stuff that happened while you were makin' other plans.


Forum Jump:


Users browsing this thread: 1 Guest(s)