Remaking of the Ridley Keystone & Mountain

Remaking of the Ridley Keystone & Mountain - Printable Version

+- (https://bigbluetrains.com)
+-- Forum: Branchline (https://bigbluetrains.com/forumdisplay.php?fid=45)
+--- Forum: Layouts (https://bigbluetrains.com/forumdisplay.php?fid=46)
+--- Thread: Remaking of the Ridley Keystone & Mountain (/showthread.php?tid=9158)

Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20

RE: Remaking of the Ridley Keystone & Mountain - tompm - 01-24-2022

The next thing I decided to try for the first time is adding feeds to the track. I purchased some pre-soldered rail joiners to use. This is in anticipation of future DCC installation.

[Image: ZJc7rfV.jpg]

This is how I installed them.

[Image: UNSYiPu.jpg]

I installed the rail joiners.

[Image: r6LKw13.jpg]

I used an awl to start a hole through the foam board.

[Image: nzIeKbw.jpg]

Next I used a long screw driver to poke through.

[Image: hlJbbyH.jpg]

I then inserted a Evergreen tube into the whole.

[Image: 7wTjNlj.jpg]

I inserted a section of the wire into the tube.

[Image: QO9ddtw.jpg]

Next pull the tube and the wire through the hole.

[Image: p6w057J.jpg]

The finished feed.

[Image: UobktZk.jpg]

RE: Remaking of the Ridley Keystone & Mountain - tompm - 01-24-2022

I finished the roadbed for the outside track and the siding to the Cement Company.

[Image: 5oSo08z.jpg]

Along the Cement Company

[Image: 4sDBZHf.jpg]

Around the curve.

[Image: t1J01P9.jpg]

Connecting to the previous laid roadbed. I did not do the siding for the Coal Yard since I still need the kit in order to figure out a few things with the layout of the buildings and coal trestle.

[Image: 9x857bs.jpg]

RE: Remaking of the Ridley Keystone & Mountain - tompm - 01-31-2022

I now decided to work on the coal yard.

Here is the kit.

[Image: FEZcMPA.jpg]

The parts pile

[Image: DEx8gxH.jpg]

The parts for the coal trestle

[Image: 4Eti74T.jpg]

Assembling the coal trestle

[Image: xuQv0Il.jpg]

Test the coal trestle out on the layout.

[Image: ea0GpDD.jpg]

RE: Remaking of the Ridley Keystone & Mountain - tompm - 01-31-2022

Next is assembling the shed

[Image: DdLj1RV.jpg]

RE: Remaking of the Ridley Keystone & Mountain - tompm - 01-31-2022

Now begins the office building

Adding mortar lines to the brick walls

[Image: fjUPNj2.jpg]

All the walls done

[Image: lhsenXr.jpg]

Add the glass to the window frames

[Image: A8eilt8.jpg]

Assemble the walls

[Image: 0ZYm10H.jpg]

Completed office building

[Image: YuR8a27.jpg]

On the layout

[Image: tdQwcNX.jpg]

To finish the model I need to add decals and weather the structures but that won't happen until we get some better weather and temperatures so I can seal the structures. I have to figure out the grade needed to reach the coal trestle and then either buy something or make something to carry the track. Lastly I need to build a base for the coal yard and determine the configuration since the as recommended placement will not work on the layout.

RE: Remaking of the Ridley Keystone & Mountain - tompm - 02-07-2022

Next structure is the Golden Valley Canning Company.

[Image: yTGcUte.jpg]

The parts.

[Image: eCyKd1Q.jpg]

Mortar lines done.

[Image: 29vx7YD.jpg]

Windows added

[Image: Dmzlyc1.jpg]

Walls for the main building

[Image: uJ2pXvb.jpg]

RE: Remaking of the Ridley Keystone & Mountain - tompm - 02-07-2022

Loading dock and outside stairs on main building. Walls for boiler house

[Image: bj7wNdg.jpg]

Loading dock main building and walls for boiler house

[Image: d2MIePw.jpg]

Finished boiler house

[Image: s5TSBZ7.jpg]

Finished main building

[Image: 0KB2h45.jpg]

Location on the layout.

[Image: K73h2iF.jpg]

I still need to add the decals. I will do that after I can seal the buildings.

RE: Remaking of the Ridley Keystone & Mountain - UP SD40-2 - 02-07-2022

Very impressed with how its coming along, Tom Applause

Your buildings are really looking GREAT! Applause

RE: Remaking of the Ridley Keystone & Mountain - tompm - 02-14-2022

I worked on the configuration for the Coal Yard.

[Image: c5knaHb.jpg]

Measure out the base

[Image: ND8LLV3.jpg]

Base down and painted.

[Image: EgJwJQy.jpg]

Coal trestle weathered

[Image: jJQER8D.jpg]

Shed weathered

[Image: imQgvFI.jpg]

Ramp to the coal trestle

[Image: mDR6WXV.jpg]

I realized after I started this post I forgot to get a photo of the office building weathered. I will get for the next update.

RE: Remaking of the Ridley Keystone & Mountain - UP SD40-2 - 02-20-2022

Great job, Tom Applause

, those buildings look awesome! Applause

RE: Remaking of the Ridley Keystone & Mountain - tompm - 02-21-2022

Thanks Deano!

Continuing with work on the coal trestle ramp.

Testing the location with the coal trestle.

[Image: SI5eIiy.jpg]

I mixed a runny solution of plaster of Paris and soaked paper towels in the mixture. I then lace them over the ramp.

[Image: n3wUXfH.jpg]

Here is the forgotten photos of the weathered office building

[Image: NLHmYWq.jpg]

For the walls I used Woodland Scenics Timber Walls. I cut the walls to size and lined them up to make sure everything fit.

[Image: EfZUBWc.jpg]

I painted the walls and weathered them. Next I glued them in place.

[Image: zlNkDZA.jpg]

Things to do next are add a layer of plaster to the ramp, weather the tracks, paint more of the foam border.

RE: Remaking of the Ridley Keystone & Mountain - ezdays - 02-22-2022

Looking good, like the building. Thumbsup

RE: Remaking of the Ridley Keystone & Mountain - nachoman - 02-23-2022

Wow - this is all looking very nice!

RE: Remaking of the Ridley Keystone & Mountain - cn nutbar - 02-23-2022

Hi Tom---I've been following your progress from the start---great work all around.I'm curious about those yellow supports/spacers that you have been using during construction to keep walls square---are they available for sale ?

RE: Remaking of the Ridley Keystone & Mountain - doctorwayne - 02-23-2022

You could probably find something similar at Canadian Tire or Princess Auto, Ed, or at Lowes or Home Depot, too.

You could also make your own with a couple pieces of 1"x3", some wood screws, and some rare earth magnets.

Wayne