Loading of coil into cars? - Printable Version +- (https://bigbluetrains.com) +-- Forum: The Depot (https://bigbluetrains.com/forumdisplay.php?fid=3) +--- Forum: Upper Berth (https://bigbluetrains.com/forumdisplay.php?fid=7) +--- Thread: Loading of coil into cars? (/showthread.php?tid=1512) |
Loading of coil into cars? - tomustang - 07-22-2009 Besides of a rail crane is there any other way to load these coils onto coil cars? Does anyone have pictures of this process or have this modeled? Here is one from a crane Re: Loading of coil into cars? - Russ Bellinis - 07-22-2009 I think they also use large forklifts at some locations. Usually the forklift would be equipped with some sort of special equipment to unload the coils. The coils weigh @ 10,000 # per coil I think. The trucks I've seen hauling coils are rated for 40,000 lb payloads and I've never seen more than 4 coils on a trailer. Re: Loading of coil into cars? - railohio - 07-22-2009 Mill here has overhead cranes indoors and heavy lift vehicles outdoors for moving coils. Re: Loading of coil into cars? - tomustang - 07-22-2009 I have searched more and found this Kalmar has a type of pick-up attachment, still need a better pic though: Thanks for reminding me about heavy forklifts Russ, I forgot all about them and the attachments they can put on Re: Loading of coil into cars? - jbaakko - 07-23-2009 tomustang Wrote:Besides of a rail crane is there any other way to load these coils onto coil cars? Does anyone have pictures of this process or have this modeled?Is that a barge!? If so, imagine the loss if that thing got hit by on wave too tall... Re: Loading of coil into cars? - upnick - 07-23-2009 Hi Tom, Found this pic of a Fantuzzi fork lift truck. <!-- m --><a class="postlink" href="http://www.fantuzzi.co.uk/heavy_fork_lift_trucks.html">http://www.fantuzzi.co.uk/heavy_fork_lift_trucks.html</a><!-- m --> Re: Loading of coil into cars? - iis612 - 07-23-2009 I have seen coils that have weighed in well over 20 tons, which is 40000 plus. When I would haul coils they were loaded and onloaded with overhead cranes, or with HD fork trucks with a large tube in place of the forks. As Russ pointed out, the average weight for the coils are in the 10000 to 20000 range. Matt |