CV29 settings - Printable Version +- (https://bigbluetrains.com) +-- Forum: The Back Shop (https://bigbluetrains.com/forumdisplay.php?fid=52) +--- Forum: DCC (https://bigbluetrains.com/forumdisplay.php?fid=38) +--- Thread: CV29 settings (/showthread.php?tid=254) |
CV29 settings - Charlie B - 12-18-2008 I just want to know if CV29 uses the same table from all manufactures. I need to reverse the normal direction of one of my PA1's for an ABA consist. I come up with a value of 35 for cv29 which changes direction 28 speed steps and no dc operation. I'm using the MRC 1803 decoder. Thanks all Charlie Re: CV29 settings - UP SD40-2 - 12-19-2008 Charlie, i have changed the direction of an engine with the stock decoders in atlas engines, but i havent done it with an MRC decoder. i have done some checking, and your decoder should meet NMRA DCC standard practices RP-9.22. The way i understand it, hit CV#29, enter the value 0 for normal direction, and 1 for reverse direction. i havent tested this, but it would be worth a try , if it didnt work, it would be easy to redo by just going back into CV#29 and putting in the value of 0 , let me know if it worked. Re: CV29 settings - jglfan - 12-19-2008 Along the lines of what Deano said, my understanding (from years ago, mind you) is that to change the direction of travel, add 1 to whatever value you would otherwise be using. # of speed steps and other factors determine what value you want, adding 1 will change the direction of travel. Gary Re: CV29 settings - Charlie B - 12-20-2008 The CV value of 35 did the job. That makes it DCC only, 28/128 speed steps and reverses the normal. I would guess it is NMRA compliant. It would not take that much to document things like this in the instructions. Thanks for the replys guys. Charlie |