![]() |
Shingles - Printable Version +- (https://bigbluetrains.com) +-- Forum: The Back Shop (https://bigbluetrains.com/forumdisplay.php?fid=52) +--- Forum: Remembering Our Fallen Flag Members (https://bigbluetrains.com/forumdisplay.php?fid=67) +---- Forum: Sumpter250 (https://bigbluetrains.com/forumdisplay.php?fid=82) +---- Thread: Shingles (/showthread.php?tid=2893) |
Shingles - Sumpter250 - 07-04-2010 Here's a brief how to on individual "wood" shingles: 1. Material. I started with a roll of "postal wrapping paper", 30" X 15', and cut off 8-1/2" so I have 8-1/2" X 15'. 2. I then cut several 12" sheets off the roll. These were then taped down, and the colors ( I chose brown, tan, white, and black, for the boathouse project ) were streaked on the paper. 3. Once the sheets were dry, strips, a scale 18" are cut off across the streaks, with a #11 XActo knife using a scale rule as a cutting guide. 4. The 8-1/2" strips are then cut, with a small scissor, to varying widths up to about 12-14 scale inches. 5. The shingles are then picked and applied using tweezers, and an old dental pick, used to hold and guide the shingles into place. I apply enough glue for about 6-7 shingles at a time, that way the glue doesn't dry out before the last shingle is in place. It's a simple enough process, and I'll make one or two strips at a time, to break up the monotony. The end result is a true random size, and color pattern, with good color, and texture. The scale 18" long shingles go on with a 9" reveal. I usually pencil in a guide line on the roof, or wall, for each new coarse of shingles. Re: Shingles - P5se Camelback - 07-04-2010 Oh ... my ... God! ![]() ![]() As said elsewhere ... "you may be right ... you may be crazy ..." ![]() ![]() (obviously the result of many long hours below deck out of sight of land for months at a time!) Re: Shingles - Ralph - 07-04-2010 Great effect but quite the labor of love! ![]() Ralph Re: Shingles - e-paw - 07-04-2010 Looks great ![]() Re: Shingles - jim currie - 07-04-2010 great looking boat house Pete , I use a similar system but never thought of wrapping paper though , been using craft paper ![]() ![]() Re: Shingles - nachoman - 07-05-2010 I would never attempt that. Two reasons: 1) A potential disaster if I sneeze ![]() 2) If a sneeze doesn't frustrate the endeavor, the cat surely will ![]() Re: Shingles - MasonJar - 07-05-2010 Jim - Try a Craft store for various "fancy" scissors. I think my daughter has a pair that cut the shape you want. They were part of a whole kit, but they can probably be had individually too. Here's a whole kit (zoom in to see patterns printed on the scissors): <!-- m --><a class="postlink" href="http://www.orientaltrading.com/ui/browse/processRequest.do?requestURI=processProductsCatalog&categoryId=377320&BP=10576&ms=cse&cm_mmc=Nextag-_-Nextag-_-Nextag-_-Nextag&sku=57/5506&srccode=cii_9324560&cpncode=23-92335483-2">http://www.orientaltrading.com/ui/brows ... 92335483-2</a><!-- m --> Andrew Re: Shingles - Herc Driver - 07-05-2010 WOW...that's a great looking result. Really nice! Re: Shingles - Sumpter250 - 07-05-2010 jim currie Wrote:great looking boat house Pete , I use a similar system but never thought of wrapping paper though , been using craft paper I was using standard 20 pound bond paper, but I was not happy with the white edges left after cutting. Darker construction paper was too heavy, so the wrap, is the best compromise I could find. I like the use of the scalloped, and straight cut shingles on the Mansard roof. You would need a specific cutter, as those scalloped shingles are all the same width, where the straight cut vary in width. " Try a Craft store for various "fancy" scissors." I might have to look into that also. Thanks Andrew. ![]() |