a little sratchbuild project - N-scale Bridge - Printable Version +- (https://bigbluetrains.com) +-- Forum: Branchline (https://bigbluetrains.com/forumdisplay.php?fid=45) +--- Forum: Scratchbuilding and kitbashing - All Scales (https://bigbluetrains.com/forumdisplay.php?fid=27) +--- Thread: a little sratchbuild project - N-scale Bridge (/showthread.php?tid=3663) |
a little sratchbuild project - N-scale Bridge - Conrail-Markus - 01-13-2011 Hallo modelers I have a little scratchbuild projekt on a very low level which every modeler can do. At one of my modules I have a river which need to be crossed. A simple 90° arrangement I didn't wont have, so I go something araound 45° but ... the proposed Atlas girder bridges will not look good: This view would be better: One girder of the snap bridge could be used but the opposide girder must move. To do this, the litte noses must be cut off. I used a sharp hobby knife: So will it look after the litte work: After this, the bridge track need to be fittet. The original track ist to short, so I use a third Kit cuz I wasn't able to get one additional bridge track from atlas. The next step is the stringer which have to be fittet. One side is easy to do and if you saw precisely you must only add a new beam made from styrene: The other side needs a bit more work. The extended beams are made from styrene to match the Atlas parts: This will be happen when I watch more TV than concentrate myself on the project: Glad to have an other kit on the shelf, so the project will be well done and I have a additional bridge for a later use. Re: a little sratchbuild project - N-scale Bridge - JohnyBotto - 01-13-2011 Awesome project Markus! Well done and your step-by-step was well presented. Thanks for the inspiration. Re: a little sratchbuild project - N-scale Bridge - Gary S - 01-13-2011 Nice project, and those N-scale Atlas bridges look good. Re: a little scratchbuild project - N-scale Bridge - P5se Camelback - 01-13-2011 An excellent bashing of an existing kit to fit a situation ... and a very nice photo essay of how you went about doing it! Nice Job! But, Markus ... quickly ... before Galen (ocalicreek) notices ... 8-) ... slip in a couple of "Bridge Shoes" at the abutments at each end of the bridges ...
... at least on the aisle side!
Re: a little sratchbuild project - N-scale Bridge - tetters - 01-13-2011 Conrail-Markus Wrote:This will be happen when I watch more TV than concentrate myself on the project: I had to laugh when I saw this. Who here hasn't done some thing like this at least once while working on a model or project for their layout. I know I have several times! Regardless, Great job on the bridges Markus! Re: a little sratchbuild project - N-scale Bridge - AF350 - 01-13-2011 Good job. Like the concept and execution of the idea Re: a little sratchbuild project - N-scale Bridge - Herc Driver - 01-14-2011 Really nice job! Re: a little sratchbuild project - N-scale Bridge - modelsof1900 - 01-14-2011 Markus, you know that you will have three attempts doing the right. Looks good! |