![]() |
Conversion ?? - Printable Version +- (https://bigbluetrains.com) +-- Forum: Mainline (https://bigbluetrains.com/forumdisplay.php?fid=17) +--- Forum: HO Modeling (https://bigbluetrains.com/forumdisplay.php?fid=21) +--- Thread: Conversion ?? (/showthread.php?tid=5588) |
Conversion ?? - kamerad47 - 11-29-2012 I'm building a couple af rail cars an the height of them are 16' 8" (real car) not sure if I'm geting it right in HO scale any help????? Re: Conversion ?? - faraway - 11-29-2012 kamerad47 Wrote:I'm building a couple af rail cars an the height of them are 16' 8" (real car) not sure if I'm geting it right in HO scale any help?????How about (16 * 12) +8 = 200" prototype height, 200 / 87 = 2.29" model height Re: Conversion ?? - BR60103 - 11-29-2012 faraway Wrote:Or 16 8/12 times 3.5 = 58.333 mmkamerad47 Wrote:I'm building a couple af rail cars an the height of them are 16' 8" (real car) not sure if I'm geting it right in HO scale any help?????How about (16 * 12) +8 = 200" prototype height, 200 / 87 = 2.29" model height Re: Conversion ?? - Mr Fixit - 11-30-2012 Real Railcar = 16 feet 8 inches 16 feet x 12 inches per foot = 192 inches plus the 8 inches = a total of 200 inches overall height of railcar. To convert inches to millimetres, there are 25.4 mm in an inch, so 200 x 25.4 = 5080 mm Next to convert the overall height in mm to HO scale we divide by 1/87, so 5080 / 87 = 58.39 mm, so 58 mm high overall 58 mm is the answer we are looking for. I hope that this and the other answers have helped to clear up your maths problem. Mark We here in the Land of OZ have supposedly been Metricated since the '70's, however many things used in the building trade are still sized according to the 'old' Imperial sizes, so it can be a problem with hardware like nuts and bolts much of which is still made in Imperial, like Whitworth threads, and other stuff is supplied as Metric threads. This means that you need double sockets and spanners, taps and dies etc. Or if you can afford them you purchase a brand called Metrinch which will work with both. Groan ![]() Re: Conversion ?? - faraway - 11-30-2012 faraway Wrote:kamerad47 Wrote:I'm building a couple af rail cars an the height of them are 16' 8" (real car) not sure if I'm geting it right in HO scale any help?????How about (16 * 12) +8 = 200" prototype height, 200 / 87 = 2.29" model height Ok, if a metric result is needed (I don't know the origin of kamerad47) the magic number is 2.54. 1 inch = 2.54 cm Re: Conversion ?? - Sumpter250 - 11-30-2012 "General", makes and sells "Scale Rulers", in 6", and 12" lengths - - - - saves a lot of "Math-Time" ![]() ![]() Ask your local Hobby Shop, or check the "tools" section of the Walthers catalog. Re: Conversion ?? - kamerad47 - 11-30-2012 Thanks for the help!!!! This is the phototype I'm building <!-- m --><a class="postlink" href="http://RailcarPhotos.com/Search.php?SearchCarNumber=93170&Search=Search">http://RailcarPhotos.com/Search.php?Sea ... rch=Search</a><!-- m --> Re: Conversion ?? - Mr Fixit - 11-30-2012 Side Extensions for C&D service. So can someone inform me as to what C&D service is? Mark Re: Conversion ?? - kamerad47 - 12-01-2012 C & D is construction & demolition waste products . There has been alot of them around the northeast US & basically it is a metal building that a railcar fits in , they dump rolloff trucks or (skip trucks) & reload it into railcars & ship to landfills . I have one of these industries on my layout, because they switch it once a day or a couple times a week Re: Conversion ?? - Mr Fixit - 12-01-2012 Thanks. Its so obvious when you know. Construction and Demolition debris. ![]() Mark Re: Conversion ?? - Brakie - 12-01-2012 kamerad47 Wrote:I'm building a couple af rail cars an the height of them are 16' 8" (real car) not sure if I'm geting it right in HO scale any help????? Not to sound like a smarty pants.. ![]() A HO scale ruler would save you a lot of math since all you'll need to do is measure 16' 8" on the ruler.. |