+- (https://bigbluetrains.com)
+-- Forum: Branchline (https://bigbluetrains.com/forumdisplay.php?fid=45)
+--- Forum: Scratchbuilding and kitbashing - All Scales (https://bigbluetrains.com/forumdisplay.php?fid=27)
+--- Thread: HO Scale Lifeboats (and some larger vessels, too) (/showthread.php?tid=6395)
HO Scale Lifeboats (and some larger vessels, too) - JaBear - 10-15-2013
Gidday, a recent project.
Cheers, the Bear.
Re: HO scratchbuilt lifeboats - Ralph - 10-15-2013
Wow. NICELY done! What did you use for the tarps?
Re: HO scratchbuilt lifeboats - teejay - 10-15-2013
Just to answer your question on tarps ,Ralph , I found that Kleenex type tissue ( just use 1 of the plys ) , spray painted , and crinkled up a bit , looks pretty realistic .
T
Re: HO scratchbuilt lifeboats - Sumpter250 - 10-15-2013
The furled sails on these sailboats, were done with the single ply of Kleenex type tissue:
JaBear, nicely done lifeboats !
I do, have to ask, . . . . what "ship" are they going to be installed on ?
The Tarps, appear to be a bit more solid than a single ply of tissue. The tie-down attachment points lead me to suspect that aluminum foil might have been used. Tissue, seems a bit too fragile for the exact cuts, and the actual attaching of the lines.
If I am wrong, please, a "tutorial" on the making of those tarps ?
Re: HO scratchbuilt lifeboats - JaBear - 10-15-2013
Thank you Ralph for your kind words.
Sumpter 250, alas there will not be new improved "Bear method of making Tarps" to astound the model railroading fraternity .
You are correct, I borrowed some of my wifes kitchen aluminium foil, and sprayed it with a rattle can of green I happened to have on hand. I would have preferred a darker green, though to be fair, I suspect to have been prototypical I should have gone for the plain canvas "cream", however I wanted a contrast between the hull and the tarp. Besides for, me, that the joy of free lancing. I had considered the tissue method which you have used so effectively for your furled sails, and have also seen it used on covering a friends flat car load, but I could envisage lots of undesirable language and a huge pile of failed attempts 
The lifeboats will be going on to a free lanced Detroit River Car Ferry based on the "Windsor". I started on the lifeboats cos I think I may need saving at some point. An example of silliness, is there a psychiatrist in the house???
I am currently scratch building the docking apron, will post photos at the appropriate time.
Cheers, the Bear.
Re: HO scratchbuilt lifeboats - doctorwayne - 10-16-2013
Nice work.
Wayne
Re: HO scratchbuilt lifeboats - Tyson Rayles - 10-16-2013
Nice job on the boats Bear!
Re: HO scratchbuilt lifeboats - Sumpter250 - 10-16-2013
JaBear Wrote:An example of silliness, is there a psychiatrist in the house???
Some nice looking, 11", single blocks.
As much as I would like to use wood for blocks and dead eyes, I have found that styrene can be worked smaller, quicker, and with less "breakage" than wood. The dead eyes on this HO scale "Cutter" started out as styrene rod, the blocks were styrene strips, of the appropriate dimensions, from Evergreen.
Re: HO scratchbuilt lifeboats - Ralph - 10-16-2013
Foil huh? Very effective. Thanks!
Re: HO scratchbuilt lifeboats - JaBear - 10-16-2013
Sumpter250 Wrote:As much as I would like to use wood for blocks and dead eyes,......Ooops, looks like I'm indulging in false pretenses :oops: those blocks are actually made from sprue from a Bowser freight car kit. Looking at your cutter I see I'm going to have to raise my own bar
Thank you all for your kind remarks.
Cheers, the Bear.
Re: HO scratchbuilt lifeboats - Sumpter250 - 10-17-2013
JaBear Wrote:those blocks are actually made from sprue from a Bowser freight car kit.
Even better ! excellent modeling, and a "recycler" 8-) 8-) 
" Looking at your cutter I see I'm going to have to raise my own bar
" Every time you try something new, or perfect an existing ability, your "bar" rises. All you really have to do is seek the better
( for you ) way. It's taken me all but 11 years of my life to get where I am now, and I'm sure some things
can still be improved on.
Re: HO scratchbuilt lifeboats - JaBear - 10-18-2013
Sumpter250 Wrote:a "recycler" :Cheapskate is the word I'd use.
Cheers, the Bear.
Re: HO scratchbuilt lifeboats - BR60103 - 10-18-2013
Does that mean you'll be sailing on Cheapskate Bay?
Re: HO scratchbuilt lifeboats - Puddlejumper - 10-19-2013
JaBear: Welcome to the forum. Please keep posting your outstanding work! I do not model boats but I truly enjoy looking at the posts of the members that do. I would like to build a PRR tugboat someday.
Dave
Re: HO scratchbuilt lifeboats - Sumpter250 - 10-19-2013
Puddlejumper Wrote:I do not model boats but I truly enjoy looking at the posts of the members that do. I would like to build a PRR tugboat someday. Dave
Building boat/ship models, is really no different than any other kind of model.
1- do the research
2- get as many photos as you can
3- ask the necessary questions ( what is this?, what does it do? why is it "there"? etc. )
4- in each photo try to find an object that you can determine the "size" of ( helps to keep things in scale )
5- choose the materials-kit-prototype-etc.
6- start building........yeah it will be a whole new learning curve, but I find that the most exciting place in life is on the
sharp leading edge of any "learning curve"
7- Last, and perhaps the most important step, enjoy the experience.