HO Scale Lifeboats (and some larger vessels, too) - Printable Version +- (https://bigbluetrains.com) +-- Forum: Branchline (https://bigbluetrains.com/forumdisplay.php?fid=45) +--- Forum: Scratchbuilding and kitbashing - All Scales (https://bigbluetrains.com/forumdisplay.php?fid=27) +--- Thread: HO Scale Lifeboats (and some larger vessels, too) (/showthread.php?tid=6395) |
Re: HO scratchbuilt lifeboats - JaBear - 12-26-2014 It’s taken a while but I’ve finally got the two smaller cowl ventilators made. I thought I had some scrap 3/16” copper tube, but I didn’t. On a work trip to the next town south I managed to get time to call into the LHS and bought some brass tube instead and also some more brass rod as I had completely miscalculated how much railing there is to be made. Thanks for looking, Cheers, the Bear. Re: HO scratchbuilt lifeboats - JaBear - 03-04-2015 It's been a while but finally the shell of the wheelhouse. Thanks for looking, Cheers, the Bear. Re: HO scratchbuilt lifeboats - Sumpter250 - 03-04-2015 Some things just take time Looks Good ! Re: HO scratchbuilt lifeboats - JaBear - 03-05-2015 Sumpter250 Wrote:Some things just take time Yeah!!! The trouble was that I was starting to suffer "Lack of Model Railroading Withdrawal Symptoms" , so it was nice to get something under way again. Had hoped to do more today but w*@K got in the way. Cheers, the Bear. Re: HO scratchbuilt lifeboats - JaBear - 03-06-2015 Looks better in situ, even if I say so myself. Thanks for looking, Cheers, the Bear. Re: HO scratchbuilt lifeboats - faraway - 03-06-2015 Looks fantastic from my chair too Re: HO scratchbuilt lifeboats - doctorwayne - 03-06-2015 Wayne Re: HO scratchbuilt lifeboats - Sumpter250 - 03-06-2015 "All ahead one third, turns for fifteen knots, steady on course" Re: HO scratchbuilt lifeboats - JaBear - 03-08-2015 Thank you, Gentlemen for your kind words. I managed to get some of the detail work done. Why is it that every time I dry fit ever thing to see if it is going to work, apart from perhaps a little fettling, everything goes just fine until I decide to pick up the soldering iron or more particularly the adhesive. Then nothing seems to fit, the stanchions are too big for their holes, or I can’t see the holes, and then I manage to get the glue, or so;der, everywhere apart from the surfaces I want to bond. Do others suffer from this problem? Thanks for looking, Cheers, the Bear. Re: HO scratchbuilt lifeboats - bdw9535 - 03-08-2015 JaBear, The joys of modeling! As others have said a very skilled and great build. Bruce Re: HO scratchbuilt lifeboats - Sumpter250 - 03-08-2015 JaBear Wrote:Had hoped to do more today but w*@K got in the way. Cheers, the Bear. WORK , is also a "four letter word" Re: HO scratchbuilt lifeboats - JaBear - 03-16-2015 Pushing my abilities. Seeing what will visually work and if it actually does. Any suggestions, advise, ideas will be carefully considered. Thanks for looking, Cheers, the Bear. Re: HO scratchbuilt lifeboats - Sumpter250 - 03-16-2015 "pushing your abilities", is part of the learning process. As modeled, each of those engine order telegraphs control two engines. Unless your vessel has four, you will only need one telegraph. the right hand handle for the starboard ( or fore )engine, the left handle for the port ( or aft engine ) engine. You've done well soldering the railings.....I know how much fun they can be. :o Re: HO scratchbuilt lifeboats - JaBear - 03-16-2015 Sumpter250 Wrote:"pushing your abilities", is part of the learning process.Yeah, but is it fun!!! The following is taken from “The Great Lakes Car Ferries” by George W. Hilton. "Manitowoc." “Engines: Four fore and aft compound, 24” + 50” X 36”, 5200 HP. Boilers: Six Scotch 13’9” x 11’6”, 160 pounds pressure." Though the “Detroit” was built some 22 years earlier, I presume that the external view was similar to this........ https://www.shorpy.com/node/15756 Cheers, the Bear. Re: HO scratchbuilt lifeboats - Sumpter250 - 03-17-2015 B - I - N - G - O !!!! Guess I won't be "questioning your research", you obviously have done it well. That said, now I am looking forward to seeing even more amazing bits ( no pun intended ) of detail. |