Atlas Parts on Athearn GP38-2? - Printable Version +- (https://bigbluetrains.com) +-- Forum: The Depot (https://bigbluetrains.com/forumdisplay.php?fid=3) +--- Forum: Lower Berth (https://bigbluetrains.com/forumdisplay.php?fid=32) +--- Thread: Atlas Parts on Athearn GP38-2? (/showthread.php?tid=888) |
Atlas Parts on Athearn GP38-2? - Trucklover - 03-05-2009 Will Atlas Parts fit on RTR Athearn locos? I have 3 Athearn RTR GP38-2's that need misc. details like horns, snow plows.... wondering if i can use Atlas parts to install on Athearn locos without any problems? Atlas Trainman snow plows: http://cgi.ebay.com/GP38-2-SNOW-PLOWS-4-TRAINMAN-ATLAS-HO-Scale_W0QQitemZ250381140253 Atlas Trainman horns: http://cgi.ebay.com/GP38-2-3-CHIME-HORNS-4-TRAINMAN-ATLAS-HO-Scale_W0QQitemZ250381140669 Re: Atlas Parts on Athearn GP38-2? - tomustang - 03-05-2009 At most you might have to bore the hole for the horn on the athearn. The plow might be a different story since the coupler will have to slide into the plow hole when its on the body, but not sure since I have older blue box athearns Re: Atlas Parts on Athearn GP38-2? - Trucklover - 03-05-2009 Thanks Tom, i guess ill just get them and see how they go lol Re: Atlas Parts on Athearn GP38-2? - upnick - 03-05-2009 Hi Josh, Not sure if those horns are bored out .... the pic isnt clear ....... i just got some of these this week to replace some Athearn horns and they look good 8 were in the pack <!-- m --><a class="postlink" href="http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&rd=1&item=250335246136&ssPageName=STRK:MEWN:IT&ih=015">http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... :IT&ih=015</a><!-- m --> Re: Atlas Parts on Athearn GP38-2? - eightyeightfan1 - 03-05-2009 Details Associates and Details West do make plows and horns for EMD diesels. They can be made to fit Athearn shells with just a couple of holes drilled, instead of trying to shoehorn some parts from another manufacturer. They are also a bit cheaper from your LHS, than if you got them from ebay. Just a suggestion..... Re: Atlas Parts on Athearn GP38-2? - Puddlejumper - 03-05-2009 I would say yes on both counts, possibly with drilling out the mounting holes... but would prolly go with brass parts from DW or DA instead, unless you were trying to save money by buying the atlas parts in bulk... Dave Re: Atlas Parts on Athearn GP38-2? - Trucklover - 03-05-2009 Nick, Ed and Dave, thanks for the suggestions. Im likeing the brass idea, ill have to give DA and DW a look, i could use some more parts as well for some other locos anyways Thanks again Re: Atlas Parts on Athearn GP38-2? - Russ Bellinis - 03-10-2009 Just one word of caution with brass plows. Make sure your track work is precise. If you have a dip in the track that allows the plow to touch the track you will have a short. Re: Atlas Parts on Athearn GP38-2? - Trucklover - 03-10-2009 Russ Bellinis Wrote:Just one word of caution with brass plows. Make sure your track work is precise. If you have a dip in the track that allows the plow to touch the track you will have a short. LOL that wouldnt be good, thanks for the word of caution Russ I put together a short list of parts, mostly DW parts, just some generic parts i could use for most of my locos, but i dont think ill be able to order them for a little while, money's tight |