Kitbashed Donohue S2 Switcher - Printable Version

+- (https://bigbluetrains.com)
+-- Forum: Mainline (https://bigbluetrains.com/forumdisplay.php?fid=17)
+--- Forum: HO Modeling (https://bigbluetrains.com/forumdisplay.php?fid=21)
+--- Thread: Kitbashed Donohue S2 Switcher (/showthread.php?tid=8910)



Kitbashed Donohue S2 Switcher - sailormatlac - 03-19-2019

This one was bashed late last year and will be the main switcher locomotive at our Donohue paper mill. It tries to replicate this ex-CP MLW S2 as it looked in the mid-2000s. This particular locomotive was acquired second-hand from Merrilees who shopped with a lower cab roof to fit tight clearance at the mill circa 1986. In the early 2000s, the engine had to be rebuilt after a serious incident (I believe a piston went through the headblock... sorry my understanding of motors is minimal at best!). When it returned from the shop, the hood Alco-style fan was replaced with an EMD GP one, giving it even more character.

It was a fun built and I weathering a black engine was quite a challenge. Since this unit was always extremely well maintained, I had to exercise a lot of restrain. In fact, the locomotive isn't painted black but rather a brownish grimy black so details can pop. Color pencils were also used to highlight panel lines, door handles and grilles. Once again, subtlety was primordial.


While the locomotive is completed, I'll need to take apart the truck sideframes and clean electrical contacts. Even if I was careful, it seems paint ended up there and kind of ruined the electrical pickup. Except for that, this Atlas locomotive is an excellent runner and equipped with a factory installed Loksound decoder.

For the anecdote, when I purchased this locomotive, it came painted in CP paint scheme and sported exactly the same roadnumber than the real locomotive when acquired by Merrilees. It was a pure coincidence!

[Image: IMG_4410b.jpg]

[Image: IMG_4437b.jpg]

[Image: IMG_4431b.jpg]

[Image: IMG_4436b.jpg]

[Image: IMG_4439b.jpg]

[Image: IMG_4435b.jpg]

[Image: IMG_4433b.jpg]

Matt


RE: Kitbashed Donohue S2 Switcher - jim currie - 03-19-2019

neat the lowered cab roof gives it a kind of bulldog look.


RE: Kitbashed Donohue S2 Switcher - doctorwayne - 03-19-2019

Another good-lookin' weathered locomotive, and I especially like ALCos.  That's a unique modification to the exhaust stack, and the cab roof reminds me of the locomotives at Stelco...

[Image: STELCO81-view1.jpg]


[Image: STELCO77.jpg]

Wayne


RE: Kitbashed Donohue S2 Switcher - lajry - 03-20-2019

No smoke stack of any kind?


RE: Kitbashed Donohue S2 Switcher - doctorwayne - 03-20-2019

(03-20-2019, 01:22 PM)lajry Wrote: No smoke stack of any kind?

On Matt's ALCo?

Well, the stack base is there, with a flapper to keep the weather (and birds) out.

The stacks on Stelco's  locomotives appear to be shortened, but I'm uncertain as to why.  The flat cab roofs were for clearance under crane cabs in some of the older mills within the plant.

Wayne


RE: Kitbashed Donohue S2 Switcher - Tyson Rayles - 03-21-2019

Great job Matt!


RE: Kitbashed Donohue S2 Switcher - CNR5103 - 03-21-2019

Nice locomotive and great weathering.


RE: Kitbashed Donohue S2 Switcher - sailormatlac - 03-21-2019

Thanks guys!

@lajry: yes, they only kept the smokestack base and added the flapper. The rotary beacon is the highest part of the locomotive for visibility.

Matt


RE: Kitbashed Donohue S2 Switcher - Brakie - 03-22-2019

Wow! What a odd but, nice looking engine.


RE: Kitbashed Donohue S2 Switcher - bdw9535 - 03-23-2019

Matt,

Great looking locomotive and weathering.  Glad to see you posting here again.

Bruce