+- (https://bigbluetrains.com)
+-- Forum: Photographer's right of way (https://bigbluetrains.com/forumdisplay.php?fid=37)
+--- Forum: Contests & Challenges (https://bigbluetrains.com/forumdisplay.php?fid=9)
+--- Thread: N-Gauger's 2020 one foot challenge (/showthread.php?tid=9084)
RE: N-Gauger's 2020 one foot challenge - ngauger - 04-30-2020
A view of what the Engineer will see on the approach to the shed
RE: N-Gauger's 2020 one foot challenge - ngauger - 04-30-2020
View of the turnouts. Both are added in. The lower (Left Hand) turnout was a plain curve that I removed to place the switch.
RE: N-Gauger's 2020 one foot challenge - ngauger - 05-10-2020
It's as "done" as it's going to be!!
A pic of the signal lights in their normal position
That red lever switch (near bottom) is triggered by the turnout to change the lights.
The wood to the left of the siding is holding the air piston.
And the final pic.
The turnout thrown to allow the engine to go straight into the new shed.
The Green Signal is now on the left (straight) siding.
I centered the building over the tracks after I took the last picture
RE: N-Gauger's 2020 one foot challenge - ngauger - 05-10-2020
Here is the original link for the original picture for reference:
https://image.shutterstock.com/z/stock-photo-railroad-repair-shop-with-roundhouse-and-turntable-1077917591.jpg