+- (https://bigbluetrains.com)
+-- Forum: Photographer's right of way (https://bigbluetrains.com/forumdisplay.php?fid=37)
+--- Forum: Contests & Challenges (https://bigbluetrains.com/forumdisplay.php?fid=9)
+--- Thread: ezday's scratchbuild 2022 challenge (/showthread.php?tid=9534)
RE: ezday's scratchbuild 2022 challenge - nachoman - 03-17-2022
Looks nice!
RE: ezday's scratchbuild 2022 challenge - Tyson Rayles - 03-18-2022
Thanks for the info Don.
RE: ezday's scratchbuild 2022 challenge - ezdays - 03-18-2022
Thanks everybody, made progress on my curved roof yesterday. I decided to go with the metal look, so I took Jim's suggestion and tried to form the curve using a heat gun. Had problems with the styrene, so I went with the Plas-Tex that I used for the kitchen walls. It bent easily but had some memory, so I did an extreme curve (first photo) and let to come back to rest where it wanted to (second photo). I found a Mrs. Dash bottle that had the profile that I wanted and glued strips of balsa and .020 styrene to the sheet. It sprung out just a bit, but I can make it fit. It is a bit oversized, better that than too small.
RE: ezday's scratchbuild 2022 challenge - tompm - 03-18-2022
The roof came out good.
There are two old Arby style buildings near us. One is still an Arby's the other is a local hamburger chain. Unfortunately the "hat" signs are gone. Next I am over that way I will try to get a photo.
RE: ezday's scratchbuild 2022 challenge - ezdays - 03-18-2022
(03-18-2022, 10:12 AM)tompm Wrote: The roof came out good.
There are two old Arby style buildings near us. One is still an Arby's the other is a local hamburger chain. Unfortunately the "hat" signs are gone. Next I am over that way I will try to get a photo.
Thanks, it would be interesting to see an old Arby's that hasn't been updated. Some have been abandon, some turned into used car lots or taco joints. I did find a face-on shot of the hat sign that I can redraw. The neon tubes distorts the lettering, plus there's not enough contrast to see anything at N scale.
They are building a new Arby's about a mile from my house, I'll bet it won't look anything like the old ones did, including the sign.
RE: ezday's scratchbuild 2022 challenge - ezdays - 03-21-2022
Still working on the roof. Got it painted, needs touch up, but the color is OK. Had a problem with its memory, it kept trying to go flat very slowly, so I glued a support on the underside and clamped it tight as the glue dried. It now fits. The last shot shows it temporarily in place. I won't glue it or the kitchen in place until I get the interior detailed. You can see some of the booths in the last photo.
RE: ezday's scratchbuild 2022 challenge - jim currie - 03-21-2022
looking good don .
Jim
RE: ezday's scratchbuild 2022 challenge - tompm - 03-21-2022
Coming along nicely!
RE: ezday's scratchbuild 2022 challenge - Tyson Rayles - 03-22-2022
Nice work Don!
RE: ezday's scratchbuild 2022 challenge - ngauger - 03-23-2022
That looks great so far!
Yeah, anything curved like that is a challenge..
RE: ezday's scratchbuild 2022 challenge - ezdays - 03-23-2022
Thanks guys, I'm now into the small details not sure how that will turn out.
RE: ezday's scratchbuild 2022 challenge - Schraddel - 03-24-2022
Don,
this looks great
Waiting fo more to come
Lutz
RE: ezday's scratchbuild 2022 challenge - ezdays - 03-25-2022
Thank you Lutz, got a bit more done as I keep trying to make things look worthy of this challenge.
I've added a white LED to the dining area and one to light the kitchen. The hole above the order counter is where I'll run the LED wire and hope that it will look like a pipe or duct going from the kitchen roof. There are a few folks getting ready to order and some already seated. Just a garbage container near each door and that completes what I need for inside detailing. It's not super-detailed and even a bit sloppy, but it will only be viewed from the outside so I wasn't really too careful. I've also started to detail the kitchen roof.
RE: ezday's scratchbuild 2022 challenge - tompm - 03-25-2022
Good job, Don. I am amazed what you are doing in such a small scale.
RE: ezday's scratchbuild 2022 challenge - jim currie - 03-25-2022
what can one say except looking great .
Jim