SIDE SHOT SATURDAY
#91
Aren't the lights under the cab to show up the ballast so that you can tell when the loco's moving?
David
Moderato ma non troppo
Perth & Exeter Railway Company
Esquesing & Chinguacousy Radial Railway
In model railroading, there are between six and two hundred ways of performing a given task.
Most modellers can get two of them to work.
Reply
#92
(12-23-2018, 08:10 PM)BR60103 Wrote: Aren't the lights under the cab to show up the ballast so that you can tell when the loco's moving?

That's what I thought, too, David, but I suspect the ones on the Stelco locos also serve as safety devices:  while lots of areas within the plant are floodlit, there are also lots of places where there's little to no lighting at all, and, of course, operations go on 24 hours a day.

A few years ago, a good friend got me a ride in this locomotive....

[Image: JUNE2012TRIPPHOTOS117.jpg]

......and as it moved its train through that coal-loader in the distance, there was no sensation of motion, even if you looked out the window at the trees on one side or the river on the other.  I knew that we were moving though, as the over 100 hoppers in the train were being loaded as we moved along.  The only way to really verify that was to look down at the ground alongside the track.....

[Image: JUNE2012TRIPPHOTOS126.jpg]

[Image: JUNE%202012%20TRIP%20PHOTOS%20133.jpg]

I recall the loader operator asking the engineer, over the radio, to "slow 'er down a bit" (I don't remember the exact wording, but something like 1/3 of a mph - in any case, a very precise and minute amount).


Wayne
Reply
#93
CNR H6 Ten-wheeler #1533.Rapido Trains announced they will be producing the CNR H6 locomotives and a CPR D10 in 2019

   
Reply
#94
Lehigh and Hudson River Alco C420 #21

Bruce

   
Reply
#95
A F&C kit I have built for a friend.

   
Guy from Southern Quebec.
Reply
#96
CNR Northerns U2G #6200 and U2c #6153

       
Reply
#97
Transformer car in G that I built


Attached Files Image(s)
   
~~ Mikey KB3VBR (Admin)
~~ NARA Member # 75    
~~ Baldwin Eddystone Unofficial Website

~~ I wonder what that would look like in 1:20.3???
Reply
#98
Conrail MOW truck

Bruce

   
Reply
#99
CNR #3011 RS-3 leaving Pte St-Charles locomotives yard.

   
Guy from Southern Quebec.
Reply
Just tidying things up a bit:

   
Don (ezdays) Day
Board administrator and
founder of the CANYON STATE RAILROAD
Reply
I always look forward to everyone else's contributions---great shots
Reply
CNR Alco FA-2 #9454 leaving St-Henri.

Is it allowed to post the same loco more than once? Different location though.

   
Guy from Southern Quebec.
Reply
Is it allowed to post the same loco more than once? Different location though.

Absolutely Guy---there are no rules---keep posting your great photos
Reply
Here's another shot of CNR U2G #6200

   
Reply
CNR U1F #6060 "Bullet Nose Betty"

   
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)