The Jack on Tracks Build Blog/Vlog

[zzrguy]

I love all these vlogs!!  Keep them coming.  I'm sure we're all learning something from you!  

Thanks I try do thing that I haven't done before and always looking for other way to do thing. 
If there anything anyone what to see done please ask i may be doing it shortly or I'll work it into a project .

[zzrguy]

So, it's time to start wiring up these two end modules which will be straight forward.
Now wiring the frogs to work with the Caboose Industries Power Routing Ground Throws is a first for me so let's see how easy it really is


.

[zzrguy]

Ok a few have asked how to make a PowerPole connector so here is a short video on how I do it and a thank you again for helping me break 500 subscribers and for the kind words while I recover

[zzrguy]

In this episode of Jack on Tracks, I'm installing Digitrax UP7 DCC panels into my Free-mo module fascia — for the first time! Watch as I measure, tape, mark, and cut openings with a Dremel tool (with some mistakes and course-corrections along the way). This is a test piece, but the method works — and I’ll show you how I dial it in.

[zzrguy]

In this episode, we’re installing DCC panels into the fascia, wiring up power, and building a custom AC-to-DC rectifier circuit using a Bojack bridge rectifier and a DC-DC converter with a digital voltmeter. ? I’ll Walk you through everything — from panel mounting to voltage tuning — and share some lessons learned as I get this Free-mo module ready for the next train show. Mistakes were made (of course), but that’s how we learn!

 

[zzrguy]

Welcome back to Jack on Tracks! In this episode, we're diving into how to wire your LocoNet system for your DCC model railroad layout. If you've ever been confused about RJ12 connectors, straight-through wiring, or how to neatly install LocoNet panels, you're not alone — and this video is here to help!

?️ From cutting and crimping RJ12 connectors to testing your cables with Klein tools and installing everything cleanly under your module, Jack walks you through every step of the process — including tips, tool recommendations, and a few troubleshooting moments.