Unloading center beam cars - Printable Version +- (https://bigbluetrains.com) +-- Forum: The Real World (https://bigbluetrains.com/forumdisplay.php?fid=19) +--- Forum: US Rails (https://bigbluetrains.com/forumdisplay.php?fid=18) +--- Thread: Unloading center beam cars (/showthread.php?tid=5039) |
Unloading center beam cars - faraway - 04-29-2012 I got some center beam cars and have a location where a dealer unloads. Unloading can be done from one side only without more modifications on the layout. Question: Is it prototypical to have only one side of the track prepared for unloading parts of the lumber load from a center beam at a small dealership? That would imply center beams are used today like boxcars much earlier when LCL was popular. I am not very optimistic to get a positive answer but it is worth to ask. Axe the bushes yes or no? Re: Unloading center beam cars - jwb - 04-29-2012 A centerbeam must be unloaded from both sides. There's warning lettering, and a diagram for those less literate, explaining how the car will tip over if you don't unload from both sides! Re: Unloading center beam cars - faraway - 04-29-2012 jwb Wrote:A centerbeam must be unloaded from both sides. There's warning lettering, and a diagram for those less literate, explaining how the car will tip over if you don't unload from both sides!That is also my understanding, sorry did not mention it. I mend if it is prototypical to unload only 1,2 or 3 packs from one side at a small dealership. However, I axed! It is technical a problem to keep the car in balance but it does not fit into todays economy. If a dealer needs less than a center beam carload he will get it on a truck. Re: Unloading center beam cars - lajry - 04-29-2012 Reinhard You just need to "pave" the other side so your forklifts can unload both sides of the bulkheads. Re: Unloading center beam cars - faraway - 04-29-2012 Yes Sir, I pave Re: Unloading center beam cars - Sumpter250 - 04-30-2012 faraway Wrote:Yes Sir, I pave The important thing here is, that you asked, got your answer, and proceeded from there. Way To Go It's always a good thing when a plan comes together. Re: Unloading center beam cars - Mike Kieran - 04-30-2012 Sumpter250 Wrote:faraway Wrote:Yes Sir, I pave Pete, have you been watching the A Team again |