Electrical Help. - Printable Version +- (https://bigbluetrains.com) +-- Forum: The Back Shop (https://bigbluetrains.com/forumdisplay.php?fid=52) +--- Forum: Engineer's Technical Workshop (https://bigbluetrains.com/forumdisplay.php?fid=28) +--- Thread: Electrical Help. (/showthread.php?tid=739) |
Electrical Help. - tetters - 02-13-2009 Here's a good one for the guys with the electrical know how. I picked up a Dayton AC Axial Fan from Acklands Grainger. They advertise on their website a cord that is compatible with the unit, however, silly me to my surprise its not really a plug in the wall type unit, but a cord that is compatible with the prongs only on the back of the unit. The other end is just a pair 18 gauge wires :| Specs on the unit are AMPS 0.23/0.22, WATTS 27/25, 115 Volts. 60/50Hz. My question is, do I need to wire this up to transformer before I can plug it in? Or can it be wired directly to a plug? :? Re: Electrical Help. - ezdays - 02-13-2009 Since your wall outlet is also 115 volts AC, there's no reason why you can't just wire it up to a standard AC power cord and run it that way. You would need a transformer if you wanted to slow the motor down, or needed the isolation, but I don't think that's necessary. It probably came without a plug on one end since they didn't know what country it was being used in and what type of plug to funish. Re: Electrical Help. - LynnB - 02-13-2009 Yep I'll say the same Specs on the unit are AMPS 0.23/0.22, WATTS 27/25, 115 Volts. 60/50Hz , the specs verify its the same as in the house, just cut an old wall plugin prongs say from the wifes curling iron and wire it together. Re: Electrical Help. - tetters - 02-13-2009 wgrider Wrote:just cut an old wall plugin prongs say from the wifes curling iron and wire it together. That is a GREAT IDEA!!! do you think she'll notice??? Just kidding. I think I'll wire a standard wall switch so that I can turn it on and off though. My thanks to both of you. |