05-27-2020, 09:28 PM
Probably rubber tubing as a driveshaft - not uncommon, but it hardens with age, and then often crumbles.
Model airplane fuel-line tubing is a good choice for a replacement, but you'll need to either measure the diameters of both the motor shaft and the worm shaft, or take the loco along if you can find a nearby model airplane shop.
If you don't have a supplier for model airplane stuff, contact me via PM.
Wayne
Model airplane fuel-line tubing is a good choice for a replacement, but you'll need to either measure the diameters of both the motor shaft and the worm shaft, or take the loco along if you can find a nearby model airplane shop.
If you don't have a supplier for model airplane stuff, contact me via PM.
Wayne