06-28-2009, 06:10 PM
So it turns out that the roll-up door was invented in the 1920s, so it will be ok - as long as I position Hamilton-Paice at the leading edge of innovation in the workplace...! 
Unfortunately, I suffered a little setback. After filing all the parts for a closer fit, I upset the MicroWeld on the workbench
and it coated several segments. I have simply left them in place to dry out, since they began to soften immediately on "impact" 
I hope that by leaving them alone, they will harden again and not lose too much of the original detail. Luckily they will not bond to the MDF work top...! 
So that's it for tonight... Pictures (one way or the other) to follow later.
Andrew
Unfortunately, I suffered a little setback. After filing all the parts for a closer fit, I upset the MicroWeld on the workbench
and it coated several segments. I have simply left them in place to dry out, since they began to soften immediately on "impact" I hope that by leaving them alone, they will harden again and not lose too much of the original detail. Luckily they will not bond to the MDF work top...! So that's it for tonight... Pictures (one way or the other) to follow later.
Andrew