Control Panel for the new layout

[Gary S]

In conjunction with the control panel, here is what the controls at each magnet location will look like. On the left is the DPDT 24vDC relay. The terminal blocks arefor connecting the magnet, the pushbutton and LED, and the wiring to the control panel. All color coded so installation and troubleshooting is easy. And no need to solder under the layout. Going from left to right, the first black and orange are for the magnet. The next black-orange-blue is for the pushbutton and LED. The last four, black-red-blue-brown are for the wiring to the control panel. The terminals are not really necessary, I could solder all the terminations and have a gob of wires underneath, but this makes it so simple and neat.