01-10-2009, 12:38 PM
Steve, without having seen the pictures of this structure, I would have never put so many details on such a small wall. Would have felt like totally overdoing it.
The front wall is almost done. Only the door and the stairs will be added later. Of all the details, only the damaged louvers were a bit tricky to do. To make those tiny slats, I made parallel cuts into the middle of a piece of .013" styrene and only after gluing it to the frame (made of .040 x .040 strips) of the louver, I cut off the sides to make individual slats. Much easier than gluing the slats one by one to the frame.
![[Image: m57.jpg]](http://www.cnw.mattheydesign.de/m57.jpg)
The windows are made of .013" styrene.
![[Image: m58.jpg]](http://www.cnw.mattheydesign.de/m58.jpg)
The front wall is almost done. Only the door and the stairs will be added later. Of all the details, only the damaged louvers were a bit tricky to do. To make those tiny slats, I made parallel cuts into the middle of a piece of .013" styrene and only after gluing it to the frame (made of .040 x .040 strips) of the louver, I cut off the sides to make individual slats. Much easier than gluing the slats one by one to the frame.
The windows are made of .013" styrene.
Kurt