08-28-2010, 08:28 PM
Bil:
If your motors are the open frame type with a V shaped spring holding the brushes and there is a tube of insulation where it pushes on one brush ....
all you need is another tube of insulation to do the other brush. The take off the original wire and hook the decoder motor wires to the brushes and the other wires to wherever.
Still won't compensate for rotten motors and assorted short sources, but...
If your motors are the open frame type with a V shaped spring holding the brushes and there is a tube of insulation where it pushes on one brush ....
all you need is another tube of insulation to do the other brush. The take off the original wire and hook the decoder motor wires to the brushes and the other wires to wherever.
Still won't compensate for rotten motors and assorted short sources, but...
David
Moderato ma non troppo
Perth & Exeter Railway Company
Esquesing & Chinguacousy Radial Railway
In model railroading, there are between six and two hundred ways of performing a given task.
Most modellers can get two of them to work.
Moderato ma non troppo
Perth & Exeter Railway Company
Esquesing & Chinguacousy Radial Railway
In model railroading, there are between six and two hundred ways of performing a given task.
Most modellers can get two of them to work.