Posts: 6,209
Threads: 1,126
Joined: Nov 2008
Yeah - I'm already "thinking" of that.. The weathering may be an issue.. This diorama will be at the rear of the layout and 4' away from any onlookers, so i don't have to worry too much about the details.
I'm trying to design these as mine cars and a mine engine. So it's mostly dirt and coal marks, I'll be detailing, maybe a few oil marks..etc.
The engine has the base coat, I'm deciding on just how much detail i want on it..
Posts: 1,999
Threads: 98
Joined: Dec 2008
Coming along nicely.
I have big hands...I wonder if working in G scale is easier?
Torrington, Ct.
NARA Member #87
I went to my Happy Place, but it was closed for renovations.
Posts: 6,209
Threads: 1,126
Joined: Nov 2008
eightyeightfan1 Wrote:Coming along nicely.
I have big hands...I wonder if working in G scale is easier?
LOL it's pretty much the same as smaller scales.. the part you just dropped will "run" and hide under or behind something.. The screw that needs to be loosened will not come loose until you use the largest screwdiver that will fit hehehehe
you know - all the same
Posts: 6,209
Threads: 1,126
Joined: Nov 2008
The post by torikoos reminded me that this contest ends tomorrow
hock:
hock:
i almost forgot!!!
Posts: 6,209
Threads: 1,126
Joined: Nov 2008
I crammed in a 3 hour modeling session tonight
Here are the results:
First - the Draw Bar showing the original plastic "I" Beam and the duplicate cut down and "scored to fit between the cars
Posts: 6,209
Threads: 1,126
Joined: Nov 2008
I figured out that the draw bar needs to pivot. Mines (and my layout) have tight cirves
So, I designed a pivot out of a cotter pin and drilled holes in the ends of the bars.
Then - I attached the bars to the trucks opposit the cpuplers and then screwed everything together
Posts: 6,209
Threads: 1,126
Joined: Nov 2008
Then I finished detailing the cars and put the trucks, brass handholds and finished detailing the paint on the cars
Posts: 6,209
Threads: 1,126
Joined: Nov 2008
As an additional item, I built a Baldwin Electric Mine Engine to tow them
Here are all of them finished.......
Posts: 2,966
Threads: 158
Joined: Dec 2008
that is remarkably creative!
--
Kevin
Check out my Shapeways creations!
3-d printed items in HO/HOn3 and more!
<!-- m --><a class="postlink" href="https://www.shapeways.com/shops/kevin-s-model-train-detail-parts">https://www.shapeways.com/shops/kevin-s ... tail-parts</a><!-- m -->
Posts: 6,209
Threads: 1,126
Joined: Nov 2008
On the cars:
I placed the base coat of "red primer" and then used a spray can of flat black to dirty them up.
I used silver on the brake handles and the steps to simulate "bare metal" from use.
I then replaced the brass steps that I removed while I painted the cars.
I took "Coal Black" paint and dry-brushed it on, in different areas around the cars.
Engine:
The top of the engine is a 1 X 4 piece of wood, with 1/4" plywood sides nailed to the 1 x 4
I put some G gauge additions on the top and them I drilled a 1/2" hole and put in a wooden dowel, that I rounded the top of for the electric pole
Posts: 6,209
Threads: 1,126
Joined: Nov 2008
nachoman Wrote:that is remarkably creative!
Thanks!!!
Posts: 4,553
Threads: 100
Joined: Dec 2008
That's mind bending!...................or is that
mine bending.
neat idea, nicely done!
We always learn far more from our own mistakes, than we will ever learn from another's advice.
The greatest place to live life, is on the sharp leading edge of a learning curve.
Lead me not into temptation.....I can find it myself!