Posts: 2,966
Threads: 158
Joined: Dec 2008
This morning, I was testing out a 2-8-0 I recently put together, adding cars to the train one at a time. As the train got to 15 cars plus a caboose, I realized the train was reaching more than 1/3 of the way around my 4x8 layout. This reminded me of being a kid trying to make a train as long as the loop - where the engine can nearly couple to the caboose. I don't recall ever making a train that stretched more than halfway. Those lightweight bachmann cars didn't do so well around those 18" curves
. So who has done it or tried doing it? Surely one of us was successful at making a train that literally caught it's own tail
.
--
Kevin
Check out my Shapeways creations!
3-d printed items in HO/HOn3 and more!
<!-- m --><a class="postlink" href="https://www.shapeways.com/shops/kevin-s-model-train-detail-parts">https://www.shapeways.com/shops/kevin-s ... tail-parts</a><!-- m -->
Posts: 307
Threads: 20
Joined: Dec 2008
I tried it about 6-8 years ago. Maybe more. I had a 7X24 track that I put down purposely to find out. I have a P2K E8/9 that seemed pretty potent. I put metal wheels on all cars, weighted them to spec, and made sure they rolled good. I put 102 cars on and that P2K walked right around with them. Only one other loco could do it, and that was an IHC Challenger. It pulled 101 because I had to take off one car because it was longer. Technically it was 102 because it had a tender.
Once I satisfied my curiosity, I changed to a 5X20. Don't you all wish you had space like that, a room 12X38?
Lynn
Whitehouse, Tx
Posts: 2,271
Threads: 155
Joined: Dec 2008
I did it last fall...! I had a small loop (4x3 table) and for the amusement of the kids (and myself
) I added enough cars to complete the loop. I don't think it coupled to itself, but it was pretty close...!
Andrew
Posts: 2,724
Threads: 160
Joined: Dec 2008
I'm guilty of this. 8-) We do it on our Christmas layout, It's just a simple loop. If I fool around with different car lengths I can get the caboose to the engine.
My other car is a locomotive, ARHS restoration crew
Posts: 2,269
Threads: 181
Joined: Dec 2008
I've done it with a large-scale Christmas train traveling a circle around the Christmas tree. It's easier to do on a circular track than an oval.
Posts: 4,161
Threads: 174
Joined: Dec 2008
I did it with my boyhood 4X8! Fun!
Ralph
Posts: 1,210
Threads: 125
Joined: Dec 2008
Many years ago I had what I believe is called an inverted figure eight and coupled Engine to caboose several times
Posts: 2,966
Threads: 158
Joined: Dec 2008
LOL. I'm glad to hear I'm not the only one! I managed to get to about 18 cars plus caboose. That was just about half way around the loop. The good news is the 2-8-0 pulled them flawlessly. The bad news is, I ran out of standard gauge freight cars!
--
Kevin
Check out my Shapeways creations!
3-d printed items in HO/HOn3 and more!
<!-- m --><a class="postlink" href="https://www.shapeways.com/shops/kevin-s-model-train-detail-parts">https://www.shapeways.com/shops/kevin-s ... tail-parts</a><!-- m -->
Posts: 1,215
Threads: 89
Joined: Dec 2008
As a kid? I did it last week
Tom
Model Conrail
PM me to get a hold of me.
Posts: 2,429
Threads: 63
Joined: Dec 2008
I was working up to it on my layout, but when the train approached the length of one side (16 feet) the first car started pulling over on the curves. I don't know if I have anything that will pull 60+ feet of cars and the British idiots don't like to put couplers on the front of locomotives.
What I do is put cars at the top of a grade and watch them race around to see if they can get to the up grade on the far side. My new water can tank car does it a treat until it hits a narrow clearance.
David
Moderato ma non troppo
Perth & Exeter Railway Company
Esquesing & Chinguacousy Radial Railway
In model railroading, there are between six and two hundred ways of performing a given task.
Most modellers can get two of them to work.
Posts: 269
Threads: 11
Joined: Dec 2008
Busted...from about 4 months ago...
...prophesy not unto us right things, speak unto us smooth things, prophesy deceits...
My blog>>> <!-- m --><a class="postlink" href="http://www.misterbobsmodelworksemporium.blogspot.com">http://www.misterbobsmodelworksemporium.blogspot.com</a><!-- m -->
Posts: 4,553
Threads: 100
Joined: Dec 2008
I couldn't afford that much rolling stock!...................until recently, I tried that on the modular layout...got to sixty feet of train, and, yup, ran out of rolling stock again. The train was, "never out of a curve", the longest straight section of track was 52'.
I did see an N scale train that almost had the caboose coupled to the pilot of the loco.....on a modular layout at a show. That, was a l o n g train!!
We always learn far more from our own mistakes, than we will ever learn from another's advice.
The greatest place to live life, is on the sharp leading edge of a learning curve.
Lead me not into temptation.....I can find it myself!
Posts: 2,966
Threads: 158
Joined: Dec 2008
that's an awesome video!
--
Kevin
Check out my Shapeways creations!
3-d printed items in HO/HOn3 and more!
<!-- m --><a class="postlink" href="https://www.shapeways.com/shops/kevin-s-model-train-detail-parts">https://www.shapeways.com/shops/kevin-s ... tail-parts</a><!-- m -->
Posts: 605
Threads: 27
Joined: Dec 2008
I got dizzy just watching the video!! Cool!!
I only know what I know, and I don't understand very much of it, either.
Member: AEA, American Legion, Lions Club International
Motto: "Essayons"
Posts: 269
Threads: 11
Joined: Dec 2008
Thanks guys...when I settle into the new house, I'll run one about four times the length of that on my N scale layout
...prophesy not unto us right things, speak unto us smooth things, prophesy deceits...
My blog>>> <!-- m --><a class="postlink" href="http://www.misterbobsmodelworksemporium.blogspot.com">http://www.misterbobsmodelworksemporium.blogspot.com</a><!-- m -->