Attention everyone
#31
As I'm not as active right now I'm grateful someone got me over here, that place went downhill fast, goes to show how bad moderation could get.
Tom

Model Conrail

PM me to get a hold of me.
Reply
#32
tomustang Wrote:As I'm not as active right now I'm grateful someone got me over here, that place went downhill fast, goes to show how bad moderation could get.

Our greatest fear was that, because of the changes over there, we were going to loose all the good people that stuck with the-gauge over the years. We might not have gotten them back and so that's why Mikey and I started Big Blue. All but one of our moderators felt the same way and are still here, as are a whole lot of our old friends. Even the paper admins and mods bailed out and went to a different forum around the same time we left. Some of the paper guys have trickled back, but it just seems like in the five years since CG took over, things haven't gotten any better. This incident with Les though, takes the cake. :o
Don (ezdays) Day
Board administrator and
founder of the CANYON STATE RAILROAD
Reply
#33
LOL. I just replied to two old threads, the postings were deleted, and I got a stern warning as a PM. Rhaven says I can't post to a thread more than 3 months old. ALL the threads there are more than three months old! Now he says I must read the rules and respond via PM that I read the rules.

This guy is MILITANT.
--
Kevin
Check out my Shapeways creations!
3-d printed items in HO/HOn3 and more!
<!-- m --><a class="postlink" href="https://www.shapeways.com/shops/kevin-s-model-train-detail-parts">https://www.shapeways.com/shops/kevin-s ... tail-parts</a><!-- m -->
Reply
#34
nachoman Wrote:LOL. I just replied to two old threads, the postings were deleted, and I got a stern warning as a PM. Rhaven says I can't post to a thread more than 3 months old. ALL the threads there are more than three months old! Now he says I must read the rules and respond via PM that I read the rules.

This guy is MILITANT.

I would ask why they don't lock the threads that are more than 3 months old. I guess that is why I am not allowed back.
Les
<!-- m --><a class="postlink" href="http://www.lesterperry.webs.com/">http://www.lesterperry.webs.com/</a><!-- m --> Check it out
http://www.youtube.com/lesterperry/
Reply
#35
nachoman Wrote:LOL. I just replied to two old threads, the postings were deleted, and I got a stern warning as a PM. Rhaven says I can't post to a thread more than 3 months old. ALL the threads there are more than three months old! Now he says I must read the rules and respond via PM that I read the rules.

This guy is MILITANT.

Boy, I wonder if the same rules apply to the paper forums? Are those guys slapped on the hand or banned for posting to an old thread? Not much going on elsewhere there. There was a point when the "Shark" was running things that he said he was going to delete all threads that he deemed inactive. 35 35 BTW, if anybody cares to know, he had started a Motorcycle forum that was also purchased by CG. He was removed as admin from that at the same time he was removed from that place we're talking about. Thumbsup If I were these guys, I'd welcome the fact that there were more than two or three guys trying to post in the railroad section. Wink Let's face it, you are right, just about every thread there has gone more than three months without a post, what do they expect anyway? Icon_lol
Don (ezdays) Day
Board administrator and
founder of the CANYON STATE RAILROAD
Reply
#36
I posted to two more older threads - basically telling someone "Nice work!" And when I say "older" I mean two years old, but the thread is still only about 5 from the top.

Let's see if they ban me or delete the posts.
--
Kevin
Check out my Shapeways creations!
3-d printed items in HO/HOn3 and more!
<!-- m --><a class="postlink" href="https://www.shapeways.com/shops/kevin-s-model-train-detail-parts">https://www.shapeways.com/shops/kevin-s ... tail-parts</a><!-- m -->
Reply
#37
Apparetnly, you can't find a thread over there that is more than 3 months old, where someone did good work, and say "Nice Job! I like your work!"

I guess it is called Necroposting.

Whatever.

I guess they want their forum to be dead.
--
Kevin
Check out my Shapeways creations!
3-d printed items in HO/HOn3 and more!
<!-- m --><a class="postlink" href="https://www.shapeways.com/shops/kevin-s-model-train-detail-parts">https://www.shapeways.com/shops/kevin-s ... tail-parts</a><!-- m -->
Reply
#38
Wow, Rhaven sent a PM saying that I had to read the forum rules and respond ASAP to his PM, he gave me about 15 minutes and I did not respond in that time, and I have been banned for life!!!

I was going to respond that I was only trying to liven up the board and give praise of good work, and that it's impossible to respond to any thread because most are over 3 months old.

And this clown can't even give me enough time to respond to his PM.
--
Kevin
Check out my Shapeways creations!
3-d printed items in HO/HOn3 and more!
<!-- m --><a class="postlink" href="https://www.shapeways.com/shops/kevin-s-model-train-detail-parts">https://www.shapeways.com/shops/kevin-s ... tail-parts</a><!-- m -->
Reply
#39
I'm still getting messages from Zealot, about banned posts, etc. Maybe they never came to realize that I was "gone". Then again, I never submitted, in triplicate, a formal resignation......I just "walked away" Icon_twisted 357 357

I still have access, couldn't find anything to reply to, so "walked away", again.
We always learn far more from our own mistakes, than we will ever learn from another's advice.
The greatest place to live life, is on the sharp leading edge of a learning curve.
Lead me not into temptation.....I can find it myself!
Reply
#40
Sumpter250 Wrote:I'm still getting messages from Zealot, about banned posts, etc. Maybe they never came to realize that I was "gone". Then again, I never submitted, in triplicate, a formal resignation......I just "walked away" Icon_twisted 357 357

I know that we "disbarred" all the mods as they quit and Mikey and I both pulled the plug on ourselves when we left. (Yes, the last one out did indeed turn the lights out). Icon_lol We both had secondary mod usernames, but when the "Shark" came aboard, he took those out as well. I think he was the only one there at one point, so I have no idea why you're getting anything like this, somehow the software has failed. Confusedhock: Maybe you should go there and post in an old thread and get yourself banned. The notifications may stop after that. 357 357
Don (ezdays) Day
Board administrator and
founder of the CANYON STATE RAILROAD
Reply
#41
i took it as a badge of honor, getting banned!
--
Kevin
Check out my Shapeways creations!
3-d printed items in HO/HOn3 and more!
<!-- m --><a class="postlink" href="https://www.shapeways.com/shops/kevin-s-model-train-detail-parts">https://www.shapeways.com/shops/kevin-s ... tail-parts</a><!-- m -->
Reply
#42
nachoman Wrote:i took it as a badge of honor, getting banned!


And I at least - take that as a compliment to all that we have done here!!
...... And the Great members we have here too!!!! Thumbsup
~~ Mikey KB3VBR (Admin)
~~ NARA Member # 75    
~~ Baldwin Eddystone Unofficial Website

~~ I wonder what that would look like in 1:20.3???
Reply
#43
ezdays Wrote:Maybe you should go there and post in an old thread and get yourself banned. The notifications may stop after that. 357 357

"nachoman" wrote:i took it as a badge of honor, getting banned!

Badge of honor - - - Icon_twisted Icon_twisted I haven't earned one of those in decades !! :o Icon_twisted Icon_twisted

Opened a new thread:
" Been a while since I was last here, been a bit busy at the other site, moderating.
Got a ton of work done on my new module set, here's some pic's."

That should infuriate the powers that be, enough to ban me ! Icon_twisted 357 Icon_twisted 357 Icon_twisted 357

Should that fail, I'll try the "old thread" idea. 357 Icon_twisted 357 Icon_twisted
We always learn far more from our own mistakes, than we will ever learn from another's advice.
The greatest place to live life, is on the sharp leading edge of a learning curve.
Lead me not into temptation.....I can find it myself!
Reply
#44
Sumpter250 Wrote:Should that fail, I'll try the "old thread" idea. 357 Icon_twisted 357 Icon_twisted
Big Grin Big Grin Well it has 10 views now, so someone must have looked in Smile Smile

Just remember - we're still kind of trying to "not let them know about this site". Big Grin
~~ Mikey KB3VBR (Admin)
~~ NARA Member # 75    
~~ Baldwin Eddystone Unofficial Website

~~ I wonder what that would look like in 1:20.3???
Reply
#45
That's why I called it "the other site"...I could go back and edit that to read "the Atlas site". Icon_twisted , but I did edit out the "other site" part.
We always learn far more from our own mistakes, than we will ever learn from another's advice.
The greatest place to live life, is on the sharp leading edge of a learning curve.
Lead me not into temptation.....I can find it myself!
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)