01-17-2022, 08:36 PM
I replaced a length of track. I store a couple of express train locos on it. I had just bought a few code 83 rerailers and found that my code 83 wasn't where I thought it was! So I took the storage track up and put 2 rerailers in it plus a piece of normal track. I had the bright idea to add a holding section at the end with a push button. (All this took 2 days of modelling time -- short periods.) Then the dead section didn't work.
I checked it out and I have a packet or Normally Closed push buttons. And no normally open ones.
Can anyone use 4-5 NC pushbuttons?
For what?
Today we were snowed in. The plows eventually came to us and did the driveway and street about 4:00. We only went out as far as moving the garbage bins to behind the car so that SWMBO can get them to the curb tmorrow morning.
I checked it out and I have a packet or Normally Closed push buttons. And no normally open ones.
Can anyone use 4-5 NC pushbuttons?
For what?
Today we were snowed in. The plows eventually came to us and did the driveway and street about 4:00. We only went out as far as moving the garbage bins to behind the car so that SWMBO can get them to the curb tmorrow morning.
David
Moderato ma non troppo
Perth & Exeter Railway Company
Esquesing & Chinguacousy Radial Railway
In model railroading, there are between six and two hundred ways of performing a given task.
Most modellers can get two of them to work.
Moderato ma non troppo
Perth & Exeter Railway Company
Esquesing & Chinguacousy Radial Railway
In model railroading, there are between six and two hundred ways of performing a given task.
Most modellers can get two of them to work.