07-20-2022, 09:11 AM
(07-20-2022, 06:45 AM)Charlie B Wrote: Good morning
Still working on a brass locomotive that I can't get to run with a decoder because of a hidden short. I tried a new decoder and that wasn't the trouble. I get no shorts anywhere with an ohm meter so I am going to find some donor trucks and see if that is where the problem is.
Stay safe and well
Charlie
Charlie had same problem with a brass serra logger ohm meter showed nothing either after much fussing and cussing i took my insulation breakdown tester at its lowest setting and found short was in a driver set the reason ohm meter didn't show it as most are only 1.5 volts lowest setting on my insulation tester is 25 volts .
Jim