Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
Here is the right wall with the mortar lines filled in. Since the lines are deeper I was able to apply paint and wipe it off.
The right wall with the window frames added.
Right wall now with door and steps.
Left wall with windows added.
Rear wall with window frames
Front wall painted
Now we have the "glass" installed in the right wall
Glass in the front wall
Left wall with glass
Put the walls together. I like the use of the rubber bands to hold everything square. This was the method the instructions recommended. The kit even provided the rubber bands.
Great building and execution! I love the stone detailing on the front facade.
Fantastic Structures you build Tom, envious of your skills here , they are very lifelike.
Jack
Next step I have decided to undertake is to finally finish tacking down and wiring the double track main line.
First section is the crossover approaching the station.
Removing the temporarily laid down track and roadbed.
Glue down the roadbed.
Tack the track down
Tacking down the outside track
Finished the curve
This now finish as far as the wiring goes Power Districts/Blocks 1 and 2.
Love the use of the t-handle push pins to secure the track while it's being glued down - that's a great idea. I kept looking at the photos and thinking "Are they staples?". Then it hit me.
Too late now, but before gluing down the track it would have been a great time to paint the rails and ties. So much easier to do that while sitting at a bench than bent over a section of track for hours on end. As I pointed out a few weeks ago, I should have done that when I laid my track to nowhere under the coal breaker!
Looking like there's going to be some action over that mainline sometime soon! Looking forward to your pictures of copious locos and rolling stock which is always a treat!
(09-05-2023, 06:24 PM)TMo Wrote: [ -> ]Too late now, but before gluing down the track it would have been a great time to paint the rails and ties. So much easier to do that while sitting at a bench than bent over a section of track for hours on end. As I pointed out a few weeks ago, I should have done that when I laid my track to nowhere under the coal breaker!
I know that would be the smart thing but I just am not that organized.
I know just where you're coming from!
Now time to connect to the Water Tower Diorama.
I had to spackle the area where two of the foam boards came together to remove a dip.
Inside track is down and ready.
Getting the roadbed down on the outside track.
Putting down the outside track
This has been an amazing read and everything is looking great! Looking forward to seeing trains run on this. The coal dealer and Morgan House both came out really nice!
Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18