The Jack on Tracks Build Blog/Vlog - Printable Version

+- (https://bigbluetrains.com)
+-- Forum: The Depot (https://bigbluetrains.com/forumdisplay.php?fid=3)
+--- Forum: Blogs (https://bigbluetrains.com/forumdisplay.php?fid=48)
+--- Thread: The Jack on Tracks Build Blog/Vlog (/showthread.php?tid=9933)

Pages: 1 2

The Jack on Tracks Build Blog/Vlog - zzrguy - 10-01-2024

Well Hello!
Hey guys, I have a YouTube channel and I upload videos about twice a week too. I've been doing this for a little over a year, so there's a lot of content to catch up on. I'll post links to my previous builds below, and I'll start with the new build that's coming up.
Feel free to ask me any questions about why or how I did something, or if you have a trick that works for you on doing it.

HO Hotraks module build
https://youtube.com/playlist?list=PLNYyjYC1xN9IwzSst0qT6COvgR_jnGeCq&si=ivqn1kgkF_KXx3QD

Long Island Ntraks module build.
https://youtube.com/playlist?list=PLNYyjYC1xN9LpJ6xB58QURHpo0tv71xes&si=jO1ZzBWc0vWZMy5-

RE: The Jack on Tracks Build Blog/Vlog - zzrguy - 10-24-2024

Firstly, I want to express my gratitude for the kind words and support you all provided following my last video. It's astonishing to think that it was filmed back in August, and now, at the end of October, I'm nearing the completion of the studio/basement renovation. It's time to dive into my next project.

Now, regarding the Free-Mo build and its standards, I've made progress with the track plan and layout design. While I have most of the materials needed for the construction, a few items ordered from England are yet to arrive, which are currently the only delay in this build.

These are the free-mo standards
http://www.free-mo.org/standard/




Here's a list of components I'll be using there will be more, and I'll add them as we go on.

Walthers 948-83001 HO Code 83 Nickel Silver Flex Track with Wood Ties
Walthers 948-83019 HO Code 83 Nickel Silver DCC-Friendly #8 Turnout - Left
Hand
Walthers 948-83020 HO Code 83 Nickel Silver DCC-Friendly #8 Turnout - Right
Hand Walthers 948-83102 HO Code 83 or 100 Nickel-Silver Rail Joiners
Walthers 948-83102 HO Code 83 or 100 Rail Joiners
Walthers 948-83104 HO Code 83 Insulated Rail Joiners
Walthers 948-83115 HO Modern Concrete Crossing w/Rerailer Ends Kit
Woodland Scenics ST1474 HO Track-Bed Roll
DCC Concepts DCB-BDKIT Baseboard Alignment Dowel Starter Kit with Drill Bits
DCC Concepts DCB-DWL - Baseboard Alignment Dowels (Pack 4)
Modeltech HO Pro-Track Rail Aligner (USA Code 83) RAU16001
Modeltech HO/OO - Pro-Track Power Feeder (Standard) SKU: PFS16001
Modeltech HO Pro-Track Rail Aligner RAU16001 and Pro-Track Power Feeder SKU: PFS16001

RE: The Jack on Tracks Build Blog/Vlog - Amalynn - 10-26-2024

Youtube seems to have a decided lack of good modelling content so glad to see somebody stepping in

RE: The Jack on Tracks Build Blog/Vlog - zzrguy - 11-11-2024

(10-26-2024, 10:03 AM)Amalynn Wrote: Youtube seems to have a decided lack of good modelling content so glad to see somebody stepping in
Thank you

RE: The Jack on Tracks Build Blog/Vlog - zzrguy - 11-11-2024



Preparing the wood, sizing and cutting the end plate, and installing the DCC Concepts Baseboard Alignment Dowels are the next steps. These dowels are precision-milled for a nearly airtight fit, ensuring perfect alignment with zero movement every time.

http://www.free-mo.org...

RE: The Jack on Tracks Build Blog/Vlog - zzrguy - 11-11-2024

Now that we've made our cuts and placed the alignment dowels, it's time to build these frames and cut the tops. Let's dive into creating something great!



RE: The Jack on Tracks Build Blog/Vlog - zzrguy - 01-17-2025

Okay, we've constructed the frame, trimmed the tops, and secured the cork base. Now, I'll demonstrate how to install this recessed top so that it's level with the endplates and sides.

   / 1334834890494980  

http://www.free-mo.org.


 

RE: The Jack on Tracks Build Blog/Vlog - zzrguy - 02-09-2025

Well, this was easier than I thought it would be, but it was still not easy. After a lot of thinking and measuring and scratching my head I came up with this design. It is pretty solid and pretty clean when it is folded up. Next video, I think we will be staining the module so stay tuned.


RE: The Jack on Tracks Build Blog/Vlog - zzrguy - 02-24-2025

Despite the challenges with sound issues and video corruption, I managed to salvage a 16-minute segment of the video. I plan to create another video focusing on the feet and demonstrating how I attached the DCC CONCEPT Alignment Dowels.



RE: The Jack on Tracks Build Blog/Vlog - zzrguy - 02-24-2025

Well this has been a hard start to the year between the flu, phenomenon, a wicked head cold, and a stay in the hospital not much has happen but here the videos of the progress that was made before I got sick.
Reply

RE: The Jack on Tracks Build Blog/Vlog - zzrguy - 02-24-2025

OK I promised I'd show you how I installed the DCC Concepts Baseboard Alignment Dowels so here is how I did them. It has been a rough couple of weeks fighting this cold.



RE: The Jack on Tracks Build Blog/Vlog - zzrguy - 02-24-2025

So, this should be fun I have to line up the roadbed on 3 modules one at a time and get then all to line up perfectly. What could go wrong.


RE: The Jack on Tracks Build Blog/Vlog - zzrguy - 02-24-2025

So I had to fix these legs before I can start the track work. Here was my quick and simple way I braced up these legs



RE: The Jack on Tracks Build Blog/Vlog - zzrguy - 03-02-2025

Thank you all for the kind words during these difficult times.

I'm hoping to get back to a video a week and move forward with all these projects.
Next up is the track work in these Free-Mo modules.



RE: The Jack on Tracks Build Blog/Vlog - zzrguy - 04-06-2025

So, it's time to get started and lay track. I got this first 8ft of track down and wired stay tuned for the next episode we'll be laying the switches and siding.

https://free-mo.org/st...