That "structure" you removed from the roof, was interesting. Was it meant to be a freight elevator equipment room?
Maybe with some slight modification it could be.
We always learn far more from our own mistakes, than we will ever learn from another's advice.
The greatest place to live life, is on the sharp leading edge of a learning curve.
Lead me not into temptation.....I can find it myself!
Railohio that will be a alleyway to a street on the other side of the building. It is way to narrow and to low for a train to fit thru. Pete the building is a bash of mainly the Walthers Sunrise feed mill and the AMB N. Hitzeman feed mill with some other parts thrown in so I'm not sure where it came from but it made the building to tall in relation to the track on a grade behind it and was really screwing up how things "down in the valley" looked compared to the "town up on the hill" so it had to go.
Mike
Sent from my pocket calculator using two tin cans and a string
We always learn far more from our own mistakes, than we will ever learn from another's advice.
The greatest place to live life, is on the sharp leading edge of a learning curve.
Lead me not into temptation.....I can find it myself!
We always learn far more from our own mistakes, than we will ever learn from another's advice.
The greatest place to live life, is on the sharp leading edge of a learning curve.
Lead me not into temptation.....I can find it myself!
Ralph thanks, the collector and the big pipe going straight down from it are from the Walthers Sunrise Feed Mill kit. The two pipes that kind of zig-zag are from my spare parts box ( I don't throw anything away ) and I don't remember where they came from orginally, sorry.
Mike
Sent from my pocket calculator using two tin cans and a string
That's OK! It just validates my own use of the spare parts box and makes the project even better in my opinion. Creating something like that out of spare parts is Modeling with a capital M.
Ralph
Ralph Wrote:That's OK! It just validates my own use of the spare parts box and makes the project even better in my opinion. Creating something like that out of spare parts is Modeling with a capital M.
Ralph
The guys over at Finescale Modeler/ sci fi, refer to "spare parts modeling" as a "junkbuild"
We always learn far more from our own mistakes, than we will ever learn from another's advice.
The greatest place to live life, is on the sharp leading edge of a learning curve.
Lead me not into temptation.....I can find it myself!
Mike
You sure might build with junk, but you sure don't build junk....we had a saying, making ice cream outta....well, you get the point.
Your work is beautiful, and I too have a hard time remembering it is N gauge.
Charlie