Posts: 1,548
Threads: 99
Joined: Jan 2012
I'm looking into hiding the underneath portion of the bench work . The club I used to belong to used a black fabric for their layout ( when having a showing or open house ) and it had it's good and bad points ......any other suggestions on ways to cover the front of the layout ? I'll be storing various bins underneath and want to hide them while still having access if need be .
T
To err is human, to blame it on somebody else shows management potential.
Posts: 2,271
Threads: 155
Joined: Dec 2008
Other than another colour of fabric?
I have seen hardboard panels cut, but without a track top and bottom, they tend to get banged up at the corners. I've also seen people put drawers and such neatly underneath. It's not so much a coverup as organizing to minimize clutter.
Andrew
Posts: 262
Threads: 6
Joined: Aug 2012
Fabric is ok, especially if hung on curtain track ... but as you say does have some drawbacks.
I think the neatest solution is to fit sliding doors if the location is suitable. No fabric dust and fibres, no tripping hazards, and can be painted any colour you fancy
Much of my layout has cupboards and draws underneath, but purely because I was given a bunch of old kitchen units when I was building the layout, and used them as the foundation
Cheers,
Kev
Such is life
Posts: 3,734
Threads: 44
Joined: Dec 2008
I use those throw-away pinic table cloths you can get from the dollar store. If they get ratty looking after a few years you can just toss em' spend another dollar and you are back in business. I use push pins to pin them to the underside not the front of the trim/facia boards.
Mike
Sent from my pocket calculator using two tin cans and a string
Posts: 568
Threads: 36
Joined: Aug 2010
Alot of module clubs use cloth curtains hung using Velcro. Use a color that doesn't "clash" w/ your layout scenery or too distracting to your eyes. It may seem to be alot of trouble to make these but they are so simple to "use" for getting under the layout.
Andy Jackson
Santa Fe Springs CA
ATSF/LAJ Ry Fan & Modeler
Posts: 4,161
Threads: 174
Joined: Dec 2008
I went with the classic dark green. I hot glued clothes pins on the inside of the fascia to hang the cloth. My good wife hemmed the several feet of fabric for me.
Maggie, our sweet cat who lived to be 17, is shown is in this old pic peaking out. She was a good girl and never jumped on the layout.
Posts: 262
Threads: 6
Joined: Aug 2012
Maggie looks a bit upset at being caught exiting her favourite hiding place
I like the glued cloths peg idea though, looks good!
Cheers,
Kev
Such is life
Posts: 2,724
Threads: 160
Joined: Dec 2008
I did something similar on my layout.
I just stapled some cheap black curtains to the bench work.
Then I cut some thin plywood to covered up the layout edge.
My other car is a locomotive, ARHS restoration crew
Posts: 1,548
Threads: 99
Joined: Jan 2012
Absolutely love the kittie , Ralph ......looks very good e-paw and maybe I can control the black better than what it looked like at my old club . Right now I like the idea of some sort of curtain temporarily but with an eye on using thin plywood or maybe hardboard sliders down the road .
Thanks , guys .
T
To err is human, to blame it on somebody else shows management potential.
Posts: 1,210
Threads: 125
Joined: Dec 2008
I used cloth on a piece of copper tubing on a large curved part
stapled black sheet to frame work behind fascia. I got the sheet at Roses dept store, it was really really cheap
You can see some ugly in these pics.
I just tried mini blinds on a straight part before my open house. I got a lot of positive comments. I don't have any pics showing it but will try to get some soon.