05-01-2018, 12:00 AM
It looks as if there's a hole in the proper place, just peeking out at the lower right side of the left bearing. You should be able to remove the brass bearing to get a better look at it. The hole may be misaligned, which would, sorta, explain the reason for the second hole,, although it's not much use where it is. If that's the case, you may have to fill that hole that's way out in left field. A piece of brass rod, same size as the hole, would do the trick. If it's an odd size, re-drill it to match whatever brass rod you have on-hand (styrene rod could work, too, as long as the two holes aren't meeting somewhere within the casting. You'll know more once that bearing is out of the way.
Wayne
Wayne