01-12-2016, 07:53 AM
Late last night I checked the Turntable and saw that the axle wasn't lining up!?!
That despite using a drill press... probably the bushings tilted a bit when gluing them in at first?
I made a jig, removed the bushings and lined everything up.
![[Image: upload_-1.jpg]](https://lh3.googleusercontent.com/-dDLjNat5Zz4/VpT0CfNnqeI/AAAAAAAAWgY/SwjDg_MuvyI/s800-Ic42/upload_-1.jpg)
Now it is correct!
I've also built the turntable pit wall. I used cork up to the pit ring level.
Then I glued stained ties up to the top.
The ties fit perfectly, I didn't have to trim any of them to fit!
That despite using a drill press... probably the bushings tilted a bit when gluing them in at first?
I made a jig, removed the bushings and lined everything up.
Now it is correct!
I've also built the turntable pit wall. I used cork up to the pit ring level.
Then I glued stained ties up to the top.
The ties fit perfectly, I didn't have to trim any of them to fit!