01-21-2018, 09:14 AM
Next was building the center beam:
Sorry, because all parts are out fo white styrene and ABS, the contrast on tghe photo is very weak.
Getting the Kadee coupler boxes inti the right height, a little shimming was necessary. Also the truck bolsters were made.
And the cross members come into being.
The mountig bores for the trucks were drilled from the inside with a small diameter drillbit. Then enlarged by an slightly bigger drillbit to make room for the screws.
Sorry, because all parts are out fo white styrene and ABS, the contrast on tghe photo is very weak.
Getting the Kadee coupler boxes inti the right height, a little shimming was necessary. Also the truck bolsters were made.
And the cross members come into being.
The mountig bores for the trucks were drilled from the inside with a small diameter drillbit. Then enlarged by an slightly bigger drillbit to make room for the screws.