Did it again, 5.00 € Caboose Kitbash

[Schraddel]

Next step ist making the ladders:


These pieces of 0,5mm brass wire will become the ladder beams.





The ladder spokes were soldered wild, by visual judgement only, onto the beams.





As the roof should be removeable, the ladders were stabilzed by this pieces to the bulkheads. Remember this will become a caboose for sessions on a Fremo layout.





Repeat at the other end.
The additional struts later will be invisible because they are very tight unter the roof.





Cut excess ends of the spokes. The ladder beams are also soldered to the end railing zu create still more stability.




Remove excess solder by grinding. Resolder if necessary.