03-13-2021, 05:02 AM
Hello,
![[Image: dsc020300iaoe.jpg]](https://abload.de/img/dsc020300iaoe.jpg)
Continuing with electrics. The electrical interconnction betwee the two groups of the articulated were done in a similar matter as i described before in my thread abot the D&RGW L-105 Challenger.
In the photo which show a further day of work progress, the LED for the cab interior is just glued and clamped onto a piece of styrene sheet. The cab interior is so well detailed, it will be a sin to leave it in the dark.
![[Image: dsc02035fnabx.jpg]](https://abload.de/img/dsc02035fnabx.jpg)
Here i improved the mounting of the cab by adding two bores an tap them. So the cab now can be fixed durabel and demountable by screwing.
![[Image: dsc0203659xfy.jpg]](https://abload.de/img/dsc0203659xfy.jpg)
The inner walls an ceiling of the can was painted reseda green.
![[Image: dsc02051e0uie.jpg]](https://abload.de/img/dsc02051e0uie.jpg)
Later i had to alter the position of the resistor and cable.
![[Image: dsc02053viu5h.jpg]](https://abload.de/img/dsc02053viu5h.jpg)
Mounting of the big double driver speaker with double adhesive foamed tape.
Lutz
![[Image: dsc020300iaoe.jpg]](https://abload.de/img/dsc020300iaoe.jpg)
Continuing with electrics. The electrical interconnction betwee the two groups of the articulated were done in a similar matter as i described before in my thread abot the D&RGW L-105 Challenger.
In the photo which show a further day of work progress, the LED for the cab interior is just glued and clamped onto a piece of styrene sheet. The cab interior is so well detailed, it will be a sin to leave it in the dark.
![[Image: dsc02035fnabx.jpg]](https://abload.de/img/dsc02035fnabx.jpg)
Here i improved the mounting of the cab by adding two bores an tap them. So the cab now can be fixed durabel and demountable by screwing.
![[Image: dsc0203659xfy.jpg]](https://abload.de/img/dsc0203659xfy.jpg)
The inner walls an ceiling of the can was painted reseda green.
![[Image: dsc02051e0uie.jpg]](https://abload.de/img/dsc02051e0uie.jpg)
Later i had to alter the position of the resistor and cable.
![[Image: dsc02053viu5h.jpg]](https://abload.de/img/dsc02053viu5h.jpg)
Mounting of the big double driver speaker with double adhesive foamed tape.
Lutz