12-16-2008, 01:28 PM
From my days of laminating air photos and other paper products to foamcore... I'd say a spray adhesive used in "dry mode" might be best. Spray the backdrop, not the printout, and wait for it to dry. Then carefully (you only get one chance) place the photo/paper. Unless you have really thick paper, the spray glue will soak through and ruin the print. You will need to check that these suggestions are compatible with whatever spray you select.
The other option is thin, photomounting double sided tape. Be sure to do the perimeter and the seams for the best result. Because this option is kind of tricky on the seams, I usually reverted to the method above to do my air photos.
Andrew
The other option is thin, photomounting double sided tape. Be sure to do the perimeter and the seams for the best result. Because this option is kind of tricky on the seams, I usually reverted to the method above to do my air photos.
Andrew