Quick weathering
#2
Quote:The 5 minute weathering method

This is the simplest form of weathering that I used.

I used polyscale paint dissolved in a mix of rubbing alcohol and/or water. Roughly 40% paint to 60% water. I used a rag and a 1/2 inch paintbrush. I apply the paint mix with the paint brush to the entire side of the boxcar in a downward gentle motion. Wait about 3-4 minutes, and then wipe the car with a clean rag in an downward motion. Continue to remove the paint-mix until you have the desire effect. If you are not happy with the result spray the car with a mix rubbing alcohol and water to remove the paint.

This method takes about 5-6 minutes per car. Detailing such has applying various shades of rust on trucks, couplers etc. will take longer. The longer you leave the paint on the car, the darker it will look.

Here’s the result using sand, grimily black and steam black


[Image: 200671201848_BOX1.jpg]

[Image: 20067120191_BOX2.jpg]


Good Luck

MLW
Reply


Messages In This Thread

Forum Jump:


Users browsing this thread: 1 Guest(s)