07-07-2010, 03:50 AM
The raw structure has been assembled. Next is to apply putty and grinding to fill the gaps and make it smooth. The roof contains only the support structure required by the model. I intent to add more horizontal beams but stay with two pillars only. Prototype pictures show only very few pillars for light roofs.
The roof attached pillars give the necessary space to freely detail the inside until the roof unit is finally glued on top.
![[Image: Img_0075.jpg]](http://rubpeters.ru.funpic.de/ohouse/Img_0075.jpg)
![[Image: Img_0076.jpg]](http://rubpeters.ru.funpic.de/ohouse/Img_0076.jpg)
![[Image: Img_0077.jpg]](http://rubpeters.ru.funpic.de/ohouse/Img_0077.jpg)
ps. I use a soft pencil to do the marking on the styrene. However it is virtually impossible to remove the marks. It take three extra layers of white paint to cover them. Do you have a tip of either another simple marker or a trick to remove pencil from styrene?
The roof attached pillars give the necessary space to freely detail the inside until the roof unit is finally glued on top.
ps. I use a soft pencil to do the marking on the styrene. However it is virtually impossible to remove the marks. It take three extra layers of white paint to cover them. Do you have a tip of either another simple marker or a trick to remove pencil from styrene?
Reinhard