07-10-2010, 08:31 AM
nachoman Wrote:1) As with all glue, the greater the surface area of the joint, the stronger the bond. Gorilla glue also benefits from some kind of mechanical joint rather than just a butt-joint.
All additional points are good!
I would also add (prompted by Kevin's note above) that you can take advantage of the foaming action as well. For example, the bus wires on my modules are held in place with a blob of glue that foamed up and over the wires. Of course you can only do this if you can turn the benchwork upside down. Trying to affix bus wires under traditional benchwork using this method will result in a blob of glue on your floor...
Andrew