NW 58th St., Miami

[cnw1961]

After sanding the walls, the joints will no longer be visible once the structure will have been painted. I use a sanding block or wrap my sanding paper around a piece of wood when I sand the walls to avoid rounding the corners. After sanding the walls I could apply the last details, only an air conditioner is still to be put on the wall with the rolling door, but I will do that after painting the structure, and painting will have to wait until the weather ...etc., etc.

So here are some pictures of the finished structure.



I did not apply any details to the rear wall, as it will face to the rear of the layout (what a coincidence ), I only built in a rolling door to justify rail service.



I hope we do not have an electrician on this forum, he will go crazy when looking at the wiring on the corner of my building. For what I could see in the blurry picture of Google street view, it looked very much like a spaghetti bowl to me, impossible to unravel. So I did some creative wiring .....



The last picture shows the front side of my structure (which is the left side of the prototype) exactly as you can see it in the prototype pic in the first post of my step-by-step. I did not get it 100% right, but I think I got close enough.