01-16-2012, 03:23 PM
Looks good. I would recommend that you also get a small moisture trap and install it between the black hose and the clear hose. Here in So Cal, I do my model painting outside in the fresh air, so I mounted my moisture trap on a 3 foot long 1x6 board and just clamp the board in my "Workmate" when I paint. Any moisture in the air will be compressed by the compressor with the air and as the air in the tank cools, the moisture will condense. You don't want water drops in your paint. You also want to mount the moisture trap away from the tank because the moisture will continue to condense in the air line. Once you have your moisture trap, keep an eye on the moisture level in the bowl and drain it regularly to keep moisture out of your air brush.