Freelance 2012

[faraway]

Bernhard, here we go. The long front wall (107cm / 42") made from two Walthers kits "American Hardware Supply" needs some horizontal support while handling. The short vertical supports are handy to stabilize the wall during testing on the layout.



All openings at the 1.st level have been closed with brick walls. Burglars are not invited at all! Some other windows have been closed random. Six elements will be used for loading gates.
Next step will be the basic paint coats from the rattle can of plastic primer and light gray/light brown. The bricks (just added and under each window) must will be get red paint with a brush. That will take some time... I am not sure about the light gray/brown layer. The original plastic tone is right but plastic needs to get a coat of paint to look right . It is difficult to get a rattle can other than light gray primer that is absolute dull. Most rattle cans are gloss or semi gloss. Both is not suitable for a building.
We are expecting windy weather. Working with the rattle can on the balcony will be a challenge... Last time gusty wind had only one direction "into my face