12-26-2010, 11:41 AM
Gary S Wrote:Don, what kind of dye did you use in the epoxy? And was it mixed into the epoxy or just put on the top?The dye I used was some stuff I bought a long time ago at a craft store for mixing in with casting resin. I mixed it in with the epoxy and used long setting stuff to give me time to get it mixed and leveled. I had two quarts of casting resin that I also bough a few years ago, but didn't realize that it has a finite shelf life, even in a sealed can. It turns out that there was enough material in the two-tube epoxy pak to do the job. The slow drying stuff ( 1 hour) stayed a bit tacky on the surface though, so I finished it off with a layer of fast-drying (5 min) stuff, which is probably why the swirls are as prominent as they are.
I like the swirls, and also like the advertisement for the forum!
The car and loco I did for our first anniversary. Just wait though for what we have planned for this year's celebration.
Don (ezdays) Day
Board administrator and
founder of the CANYON STATE RAILROAD
Board administrator and
founder of the CANYON STATE RAILROAD