06-21-2013, 08:23 PM
What else I remember:
The motor. K's motor had 2 tags coming off the brushes. The top one was bent down to contact the motor body, the magnet pole I think. This was electrically soid with the frame and the axles. The bottom one was bent outward and twisted or turned and a piece of phosphor-bronze strip soldered through it and bent and sprung to bear on the back of the tires (or tyres) of the insulated drivers for pickup.
The motor. K's motor had 2 tags coming off the brushes. The top one was bent down to contact the motor body, the magnet pole I think. This was electrically soid with the frame and the axles. The bottom one was bent outward and twisted or turned and a piece of phosphor-bronze strip soldered through it and bent and sprung to bear on the back of the tires (or tyres) of the insulated drivers for pickup.
David
Moderato ma non troppo
Perth & Exeter Railway Company
Esquesing & Chinguacousy Radial Railway
In model railroading, there are between six and two hundred ways of performing a given task.
Most modellers can get two of them to work.
Moderato ma non troppo
Perth & Exeter Railway Company
Esquesing & Chinguacousy Radial Railway
In model railroading, there are between six and two hundred ways of performing a given task.
Most modellers can get two of them to work.