08-02-2013, 06:33 AM
Nice shot!
Mike
Sent from my pocket calculator using two tin cans and a string
Sent from my pocket calculator using two tin cans and a string
Charlie b's layout
|
08-02-2013, 06:33 AM
Nice shot!
Mike
Sent from my pocket calculator using two tin cans and a string
08-06-2013, 07:50 PM
I worked on another section of the layout these past few days. If this keeps up I won't have any room left for my stuff. As Carlin said...My stuff is stuff, your stuff is .....well, stuff.
The foundry building is a kitbash of the Novelty Iron Works from IHC. Here we see the local placing a car with gears to be refurbished. The locomotive is backing out of the siding but the truck managed to block the picture, Murphy at work. I managed a better angle and caught the locomotive. And another shot as they head for the main. And they have just cleared a crossing and have to stop to await clearance from the operator .
08-06-2013, 08:35 PM
Ops shots!!! Excellent!
08-06-2013, 09:52 PM
That last photo - AMAZING!
--
Kevin Check out my Shapeways creations! 3-d printed items in HO/HOn3 and more! <!-- m --><a class="postlink" href="https://www.shapeways.com/shops/kevin-s-model-train-detail-parts">https://www.shapeways.com/shops/kevin-s ... tail-parts</a><!-- m -->
08-07-2013, 07:33 AM
Nice modeling and pics!
Mike
Sent from my pocket calculator using two tin cans and a string
08-10-2013, 01:11 PM
Hi Charlie---your attention to detail really stands out in the last shot---the trackwork,ballast,roads,scenery,vehicles and of course the train all add to a very realistic scene
08-28-2013, 05:12 PM
I made the trip to pick up my styrene yesterday, and it was raining today so I couldn't work on my truck, so I worked on this structure.
I have to do some painting and install the stairs and lights and it should look pretty good. Charlie
09-13-2013, 08:35 AM
I found some steps from Central Valley and made the platforms from .060 Styrene. The railings came with the stairs, and the uprights are H beam from Evergreen.
The lights are made from 3mm LED's and the shades are sequins that I used a 3mm leather punch to make the holes. I still have to put more lights on and inside and railings as well as the discharge tube for loading, and of course paint and weathering. Charlie
09-13-2013, 10:24 AM
Lookin' good, Charlie. Can't wait to see it in person.
Wayne
09-13-2013, 02:39 PM
Wish I could join the party but the Mrs. has other plans---how does that old saying go : "happy wife,happy life"
09-13-2013, 05:10 PM
At the rate I'm going it won't be this visit. I have never built anything like this as there is a lot of scratch building of components involved. I am not an artist but I am trying to learn patience, which has been one of my downfalls. If I can force myself to realise there is no hurry I could probably start more projects that would enhance the appearance of the layout. Thanks for the encouragement
Charlie
09-14-2013, 10:59 PM
I have had a couple good days on the silo building and managed to get some roof coating on my RV. Another coat in the morning and that is done. The silos still need some hand guard rails and the loading tube. I have really enjoyed this project. I am amazed at what you can do when you just take your time.
Charlie
09-15-2013, 01:12 AM
Very impressive, Charlie, and that stairway really sets it off nicely.
Wayne
09-15-2013, 07:26 AM
Great job on the silos Charlie!
Mike
Sent from my pocket calculator using two tin cans and a string |
« Next Oldest | Next Newest »
|