Posts: 248
	Threads: 52
	Joined: Oct 2012
	
	
 
	
	
		I'm almost out of my pollyscale rust paint. Have any of you come across an equivalent color match to this color of rust from another vendor?
Any suggestions appreciated,
Mark
	
	
	
	
	
 
 
	
	
	
		
	Posts: 854
	Threads: 52
	Joined: Nov 2009
	
	
 
	
	
		It depends what you want to do with it? Do keep in mind that rust comes in many different shades, there is not one colour rust in real life, so you could use nearly anything. 
So any other brand 'rust' paint will do. Sometimes they distinguish between new and old rust, so get both and you can blend if you need to.
If you're starting out for weathering purposes on rolling stock, locomotives or structures etc, you can also use craft paints, both acrylics and oils.  The sky is the limit. Get the burned and raw ambers, as well as the burned and raw sienna colours and you're well on your way. Dry brush these, blend and fade using a variety of brush techniques, stippling is one that looks good on car roofs etc, and remember to always go from light colours to dark. 
This roof was done that way. 
Outdoor shots by 
Koos, on Flickr
hope that helps.
Koos
	
 
	
	
Be sure to visit my model railroad blog at  <!-- m --><a class="postlink" href="http://www.namrr.blogspot.com">http://www.namrr.blogspot.com</a><!-- m -->
	
	
 
 
	
	
	
		
	Posts: 2,271
	Threads: 155
	Joined: Dec 2008
	
	
 
	
	
		Bragdon also makes a range of rust coloured weathering powders. I've seen techniques that blend the powder with paint that looks amazing. So far, I've just stuck with either the powder or the acrylic craft paint alone, with decent results.
Andrew
	
	
	
	
	
 
 
	
	
	
		
	Posts: 4,161
	Threads: 174
	Joined: Dec 2008
	
	
 
	
	
		Nice mini-tutorial about painting roofs Koos! Looks great!
	
	
	
	
	
 
 
	
	
	
		
	Posts: 1,146
	Threads: 17
	Joined: Jun 2022
	
	
 
	
	
		Got an easy acrylic mix that works well for rust, and there is no specific ratio - just dab and mix until it looks right, and then periodically add a dash of each color as it gets exhausted:
Brown
Neon Orange
For highlights, nothing better than a light brushing of PanPastel rust.
	
	
	
	
	
 
 
	
	
	
		
	Posts: 1,315
	Threads: 143
	Joined: Jan 2009
	
	
 
	
	
		I'll throw in my two cents worth, you can get a nice rusty brown by mixing orange and purple to lighten it add white to darken add black or burnt umber theĀ  hue can be adjusted.
Jim