Posts: 5,859
Threads: 175
Joined: Dec 2008
Neat video, Charlie and I really like the looks of that Hippo with the "coast to coast" tender
Steamtrains Wrote:That's a first for me...A pusher in HO...!!! Good job..!!
Hey, Gus, I occasionally run pushers, too, but only on long trains where double-headed locos are insufficient to make the grades. Mine, of course, don't have sound, as operation is DC.
Wayne
Posts: 9,820
Threads: 234
Joined: Dec 2008
Fluesheet Wrote:I'd added a separate pusher several times on my old layout (for fun), and it's a tough job to get the power right on both for one person. You can cheat and consist them, but that's, well, cheating.
Hi Matt
Thanks for the comments. I had a throttle in each hand to start things. It would have been nice to be able to keep them there but I had to put them down to do the video. The locomotives are not speed matched, something I just haven't taken the time to do.
There is always something to do.
Actually the locomotives were quite loud, I had to take the volume way down, but most of that is the mike on this camera, it is too sensitive, in fact so sensitive it is almost impossible to use outdoors because it picks up wind noise even without any wind .
Charlie
Posts: 3,683
Threads: 118
Joined: Jan 2009
I just watched the video. Very cool, and I'll echo the comment, the pusher part was very good. Liked the sound too.
Posts: 2,458
Threads: 57
Joined: Dec 2008
Just my 2 bits....While I'd like to have sound, it just drives me up the wall...I can't begin to imagine what several locos going at the same time would sound like...
The "clickety-clack" of steel wheels is all the "railroady" sound I need...
Gus (LC&P).
Posts: 335
Threads: 27
Joined: Dec 2008
Matt Goodman
Columbus, Ohio
Posts: 9,820
Threads: 234
Joined: Dec 2008
When your hearing is as bad as mine you tend to make things overly loud, just to hear them. I run by sound when I don't feel like walking around with the train. All of the layout is not visible from any one spot.
When it gets to be too much, you just hit F8 and shut the sound off.
Charlie
Posts: 3,683
Threads: 118
Joined: Jan 2009
On Mike Spoor's layout where I have operated a couple times, most of his locos don't have sound. But when a loco with sound went by, it was a real treat. I definitely like sound!
Posts: 9,820
Threads: 234
Joined: Dec 2008
I did a little work on my waterfall area this morning. It is made using the silicone caulking method. Very easy to do.
The verticle silicone was squeezed onto wax paper and I let it set for a day.
Then I used silicone to make the rapids and glue the verticle sheet in place
I'll add some more silicone at the bottom to finish this scene.
Charlie
Posts: 3,683
Threads: 118
Joined: Jan 2009
That certainly looks like water going over the falls. I really like the last photo from under the trestle. Very cool!
How's the weather up there? I've been having to run the train room air conditioner for about the last month. You?
Posts: 5,859
Threads: 175
Joined: Dec 2008
Posts: 296
Threads: 24
Joined: Dec 2008
Charlie...that's Outstanding ! Didja put a bucket under the layout so the floor doesn't get wet ??? If you get time, next time do us a little "How-To" Bob C.
James Thurber - "It is better to know some of the questions than all of the answers."
Posts: 4,161
Threads: 174
Joined: Dec 2008
Posts: 9,820
Threads: 234
Joined: Dec 2008
Gary S Wrote:That certainly looks like water going over the falls. I really like the last photo from under the trestle. Very cool!
How's the weather up there? I've been having to run the train room air conditioner for about the last month. You? We have finally had some dry weather, and though we have had some 90 degree days I haven't needed the AC in the train room. It stays pretty cool most of the day as long as I keep it closed up and in the evenings I can open it up and let the cool air in.
Charlie
Posts: 9,820
Threads: 234
Joined: Dec 2008
Posts: 9,820
Threads: 234
Joined: Dec 2008
Bob C Wrote:Charlie...that's Outstanding ! Didja put a bucket under the layout so the floor doesn't get wet ??? If you get time, next time do us a little "How-To" Bob C. I can't take credit for the idea. I watched this short video <!-- m --><a class="postlink" href="http://modeltrainsites.com/videos-how-waterfalls-are-made-for-model-%5B8SUgoMJhO1I%5D.cfm">http://modeltrainsites.com/videos-how-w ... O1I%5D.cfm</a><!-- m -->
and got pretty good results.
Charlie
|